Order Products : sales@su-jiao.com
VESTOSINT® 2155 natural color
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Evonik Industries AG |
| Trademark: | VESTOSINT® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dEYmuM_VESTOSINT-2155-natural-color.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Powder for fluidized bed coating, minicoat and liquid coating and composites VESTOSINT 2155 is a polyamide 12 fine powder for the use in liquid coating systems. It is used as an additive for instance in coil coating systems, to improve abrasion resistance and T-bend test. It also can be used in minicoating of small iron parts, e.g., foundation corsetry or ferrite rings. VESTOSINT 2155 is also available in different colors. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.02 | g/cm³ | ISO 1183 |
| Apparent Density | > 0.35 | g/cm³ | ISO 60 |
| Water Absorption | ISO 62 | ||
| Saturation, 100°C 1 | 1.9 | % | |
| Saturation, 23°C 2 | 1.3 | % | |
| Equilibrium, 23°C, 50% RH | 0.50 | % | |
| Average Particle Size 3 | 65 | µm |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 75 | ISO 868 | |
| Ball Indentation Hardness 4 | 90.0 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 43.0 | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2 | ||
| Yield | 6.0 | % | |
| Break | > 100 | % | |
| Taber Abrasion Resistance (100 Cycles, 500 g, CS-17 Wheel) | < 1.00 | mg | ASTM D1242 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) | 184 | °C | ISO 3146 |
| CLTE - Flow (23 to 55°C) | 1.1E-4 | cm/cm/°C | ISO 11359-2 |
| Specific Heat | 2350 | J/kg/°C | DIN 53765 |
| Thermal Conductivity | 0.23 to 0.29 | W/m/K | DIN 52612 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+14 | ohms·cm | IEC 60093 |
| Electric Strength 5 | 90 | kV/mm | IEC 60243-1 |
| Note Message | |
|---|---|
| 1 . | Immersion |
| 2 . | 96%RH |
| 3 . | Laser diffraction analysis (Malvern Mastersizer), d50 |
| 4 . | H30 |
| 5 . | K20/P50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TOTAL Polypropylene PPH 3571 | TOTAL Refining & Chemicals | PP Homopolymer | TOTAL Polypropylene |
| ALCOM® PC 740/4.2 UV WT1100-08LD2 | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| Iupital® FX-11 | Mitsubishi Engineering-Plastics Corp | Acetal (POM) Copolymer | Iupital® |
| PHOENIX™ 9551 | Phon Tech Industrial Company | TPE | PHOENIX™ |
| KMI PP KM-599IB | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
