Order Products : sales@su-jiao.com
GLS PP YT49
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | GLS Polymers Pvt. Ltd. |
| Trademark: | GLS PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dDSrEU_GLS-PP-YT49.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PP 20 TALC |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 to 1.06 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.0 to 10 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 23.0 to 27.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | > 5.0 | % | ASTM D638 |
| Flexural Modulus | 1800 to 2000 | MPa | ASTM D790 |
| Flexural Strength | 25.0 to 30.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm) | 55 to 70 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 75.0 to 80.0 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 78.0 | °C | |
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 190 to 220 | °C | |
| Mold Temperature | 32.0 to 64.0 | °C | |
| Injection Pressure | 65.0 to 105 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SHIN-A SER-2001 | SHIN-A T&C | Epoxy | SHIN-A |
| VITAMIDE® AB36BK8525 | Jackdaw Polymers | Nylon 66 | VITAMIDE® |
| Vyncolit® 1908M | Vyncolit N.V. | Epoxy | Vyncolit® |
| Biomer® P226 | Biomer | Biodeg Polymers | Biomer® |
| HIVOREX 5000S | Lotte Chemical Corporation | HDPE | HIVOREX |
