Order Products : sales@su-jiao.com
RTP 6001-60A Z
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dCg6mw_RTP-6001-60A-Z.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| RTP 6001-60A Z is a thermoplastic elastomer (TPE) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 60 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain, 3.18 mm) | 1.31 | MPa | ASTM D412 |
| Tensile Strength 2(Break, 3.20 mm) | 5.86 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | 930 | % | ASTM D412 |
| Tear Strength 3 | 25.4 | kN/m | ASTM D624 |
| Compression Set 4 | ASTM D395B | ||
| 23°C, 22 hr | 20 | % | ASTM D395B |
| 70°C, 22 hr | 70 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 51.7 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 182 - 238 | °C | |
| Mold Temperature | 10.0 - 48.9 | °C |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | Mouth die C, 510mm/min |
| 2 . | C mold, 500 mm/min |
| 3 . | C mould |
| 4 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Queo™ 8201LA | Borealis AG | Plastomer | Queo™ |
| TechnoFin HDPE-4 | TechnoCompound GmbH | HDPE | TechnoFin |
| LNP™ THERMOCOMP™ DF003E compound | SABIC Innovative Plastics | PC | LNP™ THERMOCOMP™ |
| OxyVinyls® 225 | OxyVinyls, LP | PVC Homopolymer | OxyVinyls® |
| ULTEM™ 2310 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
