Order Products : sales@su-jiao.com
Amodel® A-4133 HH
| Category: | PPA , Polyphthalamide |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Amodel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | d9virh_Amodel-A-4133-HH-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Amodel® A-4133 HH is a 33% glass fiber reinforced heat stabilized grade of polyphthalamide (PPA) that has been designed to provide outstanding property retention to thermal oxidative degradation at temperatures of 230°C. Other features are fast cycling and hot water moldability. This product is particularly suitable to air induction applications within downsized automotive engines such as air induction charge air cooling and exhaust gas recirculation.
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Multi-Point Data |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.47 | -- | g/cm³ | ISO 1183/A |
| Molding Shrinkage | ASTM D955 | |||
| Flow | 0.50 | -- | % | ASTM D955 |
| Transverse flow | 1.0 | -- | % | ASTM D955 |
| Water Absorption (24 hr) | 0.43 | -- | % | ASTM D570 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 12800 | -- | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | |||
| Fracture, 23°C | 195 | -- | MPa | ISO 527-2 |
| Fracture, 200°C | 70.0 | -- | MPa | ISO 527-2 |
| Fracture, 230°C | 60.0 | -- | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2 | |||
| Fracture, 23°C | 2.0 | -- | % | ISO 527-2 |
| Fracture, 200°C | 8.1 | -- | % | ISO 527-2 |
| Fracture, 230°C | 8.4 | -- | % | ISO 527-2 |
| Flexural Modulus (23°C) | 10900 | -- | MPa | ISO 178 |
| Flexural Stress (23°C) | 290 | -- | MPa | ISO 178 |
| Compressive Strength | 179 | 172 | MPa | ASTM D695 |
| Shear Strength | 89.6 | 75.8 | MPa | ASTM D732 |
| Poisson's Ratio | 0.41 | -- | ASTM E132 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 9.2 | -- | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 73 | -- | kJ/m² | ISO 179/1eU |
| Notched Izod Impact (23°C) | 9.2 | -- | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength (23°C) | 65 | -- | kJ/m² | ISO 180/1U |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 297 | -- | °C | ISO 75-2/A |
| Melting Temperature | 327 | -- | °C | ASTM D570, ISO 11357-3 |
| Linear thermal expansion coefficient | ASTM E831 | |||
| Flow : 0 to 100°C | 2.0E-5 | -- | cm/cm/°C | ASTM E831 |
| Flow : 100 to 200°C | 1.5E-5 | -- | cm/cm/°C | ASTM E831 |
| Lateral : 0 to 100°C | 7.6E-5 | -- | cm/cm/°C | ASTM E831 |
| Lateral : 100 to 200°C | 1.2E-4 | -- | cm/cm/°C | ASTM E831 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 2.0E+15 | 5.0E+14 | ohms·cm | ASTM D257 |
| Dielectric Strength (1.60 mm) | 20 | 20 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | |||
| 60 Hz | 3.80 | 4.30 | ASTM D150 | |
| 1 MHz | 3.60 | 3.40 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | |||
| 60 Hz | 4.0E-3 | 0.020 | ASTM D150 | |
| 1 MHz | 0.012 | 0.019 | ASTM D150 | |
| Comparative Tracking Index (CTI) | 600 | 600 | V | UL 746 |
| High Voltage Arc Tracking Rate (HVTR) | 14.0 | 18.0 | mm/min | UL 746 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating 1(3.20 mm) | HB | -- | UL 94 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.045 | % | |
| Rear Temperature | 318 - 324 | °C | |
| Front Temperature | 327 - 332 | °C | |
| Processing (Melt) Temp | 330 - 335 | °C | |
| Mold Temperature | 65.6 - 93.3 | °C |
| Injection instructions |
|---|
| Injection Rate: 3 to 4 in/secHolding Pressure: 50% of injection pressureStorage: Amodel® compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Amodel® resins be dried prior to molding following the recommendations found in this datasheet and/or in the Amodel® processing guide. Proper Ventilation: It is strongly recommended that the processing site be correctly ventilated during molding. The ventilation should be placed directly above the injection nozzle to prevent exposure to fumes and gases that may be generated. In the event of a barrel purge where a large melt patty may be generated, it is often advisable to draw the purge patty into a bucket of water to reduce fumes. Hot Runners: Solvay does not encourage the use of hot runner technology with this product. For further clarification on hot runners, please contact your Solvay Specialty Polymers Technical Marketing representative. |
| Note Message | |
|---|---|
| 1 . | These flammability ratings are not intended to reflect hazards presented by these or any other materials under actual fire conditions. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Retpol® CB 01/2 HSE | PolyPacific Pty. Ltd. | PP Copolymer | Retpol® |
| DESOX™ DSC401G3 | DESCO Co., Ltd. | PBT | DESOX™ |
| Latamid 6 H2 G/50 | LATI S.p.A. | Nylon 6 | Latamid |
| Lushan EV1050G1/RF | Guangzhou Lushan New Materials Co., Ltd | EVA | Lushan |
| Sylvin 7011EE-82FU Brown 7246 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
