Order Products : sales@su-jiao.com
Jam PE 22502
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Jam Petrochemical Company |
| Trademark: | Jam PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | d8kG3F_Jam-PE-22502.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jam PE 22502 is a Linear Low Density Polyethylene product. It is available in Africa & Middle East. Primary characteristic: butene comonomer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 to 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.8 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 25 µm, Blown Film | 12.0 | MPa | |
| TD : Yield, 25 µm, Blown Film | 11.5 | MPa | |
| MD : Break, 25 µm, Blown Film | 40.0 | MPa | |
| TD : Break, 25 µm, Blown Film | 32.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm, Blown Film | 600 | % | |
| TD : Break, 25 µm, Blown Film | 700 | % | |
| Dart Drop Impact (25 µm, Blown Film) | 70 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm, Blown Film | 130 | g | |
| TD : 25 µm, Blown Film | 350 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 25.0 µm, Blown Film) | 38 | ASTM D1790 | |
| Haze (25.0 µm, Blown Film) | 21 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1402 N | RTP Company | PESU | RTP |
| SCANAMID 66 A53^EM | Polykemi AB | Nylon 66 | SCANAMID 66 |
| ESTOPLAST XU 215 NN01 | Ester Industries Ltd. | Nylon, Unspecified | ESTOPLAST XU |
| Lucky Enpla LPB1000 | Lucky Enpla Co LTD | PBT | Lucky Enpla |
| Magnobond 99 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
