Order Products : sales@su-jiao.com
OCTAL PET DPET
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | OCTAL Holding & Co. |
| Trademark: | OCTAL PET |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | d89Kz8_OCTAL-PET-DPET.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Clear Polyethylene Terephthalate (PET) sheet. Plastic packaging products. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.33 | g/cm³ | ASTM D1503 |
| Thickness 1 | 200.0 to 1200.0 | µm |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Core ID | 152 | mm | |
| Denest/Anti-block Treatment | |||
| Available | Internal Anti-block Structure | ||
| Standard | Surface Silicone Coating | ||
| Roll Outer Diameter | 100.00 | cm | |
| Thermoforming Molding Temperature | 121 to 154 | °C | |
| Width - of sheet | < 168.00 | cm |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Recommended / Available | 200 to 1200 µm | ||
| Tensile Strength - MD (Break) | 55.3 to 62.2 | MPa | ASTM D882 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Transmittance | > 90.0 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | Variation: ±1% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVALEN® PQ 81 T 10 | Plastcom | PP, Unspecified | SLOVALEN® |
| ADDINYL B2 ZV20 | ADDIPLAST | Nylon 6 | ADDINYL |
| Cellidor CP 400-17 | ALBIS PLASTIC GmbH | CAP | Cellidor |
| POLYFLAM® RPP 371ND | A. Schulman Inc. | PP, Unspecified | POLYFLAM® |
| Elastollan® 1180 A 10 FC | BASF Polyurethanes GmbH | TPU-Polyether | Elastollan® |
