Order Products : sales@su-jiao.com
CERTENE™ LLBF-122D
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | d6VOUb_CERTENE-LLBF-122D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LLBF-122D is a certified prime grade Ethylene-Butene-copolymer, specially designed for production of BLOWN FILM for general purpose applications. LLBF-122D features excellent combination of easy processability with very good film strength as well as toughness properties. LLBF-122D major applications include industrial liners, garment, trash and produce bags. Maximum recommended film drawdown is 0.5 mil. LLBF-122D contains medium slip and high antiblock. LLBF-122D complies with FDA regulation 21CFR 117.1520 (c) 3.1 (a) and with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| secant modulus | ASTM D882 | ||
| 1% secant, MD : 25 µm | 207 | MPa | ASTM D882 |
| 1% secant, TD : 25 µm | 228 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 25 µm | 8.27 | MPa | ASTM D882 |
| TD : Yield, 25 µm | 8.27 | MPa | ASTM D882 |
| MD : Break, 25 µm | 55.2 | MPa | ASTM D882 |
| TD : Break, 25 µm | 40.7 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm | 570 | % | ASTM D882 |
| TD : Break, 25 µm | 840 | % | ASTM D882 |
| Dart Drop Impact 1(25 µm) | 95 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 80 | g | ASTM D1922 |
| TD : 25 µm | 350 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 25.4 µm, Blown Film) | 45 | ASTM D2457 | |
| Haze (25.4 µm, Blown Film) | 17 | % | ASTM D1003 |
| Additional Information |
|---|
| Film Specimen: 1.0 mils (25 µm) film, melt temperature 395-430°F (200-220°C), blow-up-ratio 2.5 :1. |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vistamaxx™ 7010FL | ExxonMobil Chemical | PP Elastomer | Vistamaxx™ |
| Bynel® 50E725 | DuPont Packaging & Industrial Polymers | PP, Unspecified | Bynel® |
| Arylmax® P7000 | Polymics, Ltd. | PAEK | Arylmax® |
| Iupilon® GSH2010SR 9920A | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| LUVOCOM® 50-8906 | Lehmann & Voss & Co. | PC | LUVOCOM® |
