Order Products : sales@su-jiao.com
Braskem PE HDI4553
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem IDESA |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | d5cmUS_BraskemPEHDI4553.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HDI4553 is a high-flow, high density polyethylene copolymer intended for injection molding of thin wall containers. This material will allow for cycle time reduction while still imparting reasonable impact strength. This resin meets the Food and Drug Administration requirements of 21CFR 177.1520. Applications: Thin wall applications. Cultured dairy containers, margarine tubs and containers for frozen products. Process: Injection Molding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.953 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 45 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 25.5 | MPa | ASTM D638 |
| Flexural Modulus - Tangent | 1.21 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 20 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 74.0 | °C | ASTM D648 |
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 120 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1402 N | RTP Company | PESU | RTP |
| REXtac® APAO RT 4304 | Huntsman Corporation | PAO | REXtac® APAO |
| NuSil MED1-6604 | NuSil Technology | Silicone | NuSil |
| AKROMID® A3 S1 natural (2310) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| LEXAN™ FXE4472L resin | SABIC Innovative Plastics Asia Pacific | PC | LEXAN™ |
