Order Products : sales@su-jiao.com
LTP LTP8275
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Chengdu Letian Plastics Co., Ltd |
| Trademark: | LTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | d4U6b5_LTP-LTP8275.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LTP 8200 serials is reinforced composite materials with high performance based on PPS, and are extensively applied in injection mold to structure and parts of electric appliance and automobiles. It is used to replace materials of ABS, AES, AS, ASA, PC/ABS serial. The LTP 8200 serials materials have the characteristics of high impact strength, high dimensional stability, high flow power and low moisture absorption. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.50 | g/cm³ | ASTM D792 |
| Molding Shrinkage 1 | |||
| Across Flow : 3.00 mm | 0.80 | % | |
| Flow : 3.00 mm | 0.50 | % | |
| Water Absorption (Saturation) | 0.10 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 80.0 | MPa | GB/T 1040 |
| Tensile Strain (Break) | 12 | % | GB/T 1040 |
| Flexural Stress | 120 | MPa | GB/T 1042 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 130 | kJ/m² | GB/T 1043 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | 110 | °C | GB/T 1634 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 5.0E+14 | ohms | GB/T 1410 |
| Volume Resistivity | 3.0E+13 | ohms·cm | GB/T 1410 |
| Dielectric Strength | 15 | kV/mm | ASTM D149 |
| Dielectric Constant | GB/T 1409 | ||
| 25°C, 1 kHz | 3.50 | ||
| 25°C, 1 MHz | 3.50 | ||
| Dissipation Factor | GB/T 1409 | ||
| 25°C, 1 kHz | 0.020 | ||
| 25°C, 1 MHz | 0.020 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | 80x80x3 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NB40 GR30 NL XA60 | Eurotec Engineering Plastics | Nylon 6 | Tecomid® |
| ASI POLYPROPYLENE PP 3480-01 | A. Schulman Inc. | PP Impact Copolymer | ASI POLYPROPYLENE |
| Artenius DESIGN+ | Artenius | PET | Artenius |
| Grilamid® XE 4105 nat | EMS-GRIVORY | Nylon 610 | Grilamid® |
| LUVOCOM® 55-8647 | LEHVOSS Group | PC+ABS | LUVOCOM® |
