Plenco 02311 (Injection) Datasheet,Phenolic,Plastics Engineering Co.-SHANGHAI SUSHENG

Message
PLENCO 02311 is a versatile general purpose organic filled phenolic molding compound offering excellent mold processability and optimized cure cycles. PLENCO 02311 is also granulated to provide improved pourability characteristics for cold powder compression molding. UL recognized under component file E40654. 02311 is available in black or brown color.

General Information
Filler / Reinforcement	Organic filler
Features	Workability, good Fast curing General
Uses	General
UL File Number	E40654
Appearance	Brown Black
Forms	Particles
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.41	g/cm³	ASTM D792
Apparent Density	0.65	g/cm³	ASTM D1895
Molding Shrinkage - Flow	1.0	%	ASTM D955
Water Absorption (24 hr)	0.43	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (E-Scale)	83		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	8440	MPa	ASTM D638
Tensile Strength	59.0	MPa	ASTM D638
Tensile Elongation (Break)	0.80	%	ASTM D638
Flexural Modulus	7280	MPa	ASTM D790
Flexural Strength	85.9	MPa	ASTM D790
Compressive Strength	198	MPa	ASTM D695

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength	17.8	J/m	ASTM D256
Notched Izod Impact	16	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	157	°C	ASTM D648
Continuous Use Temperature	201	°C	ASTM D794
CLTE - Flow	5.7E-5	cm/cm/°C	ASTM E831
Thermal Conductivity (100°C)	0.40	W/m/K	ASTM C177

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+12	ohms·cm	ASTM D257
Dielectric Strength ¹	9.1	kV/mm	ASTM D149
Dielectric Constant (1 MHz)	5.30		ASTM D150
Dissipation Factor (1 MHz)	0.081		ASTM D150
Arc Resistance	144	sec	ASTM D495
Comparative Tracking Index (CTI)	175	V	UL 746

Flammability	Nominal Value	Unit	Test Method
Flame Rating (1.50 mm)	HB		UL 94
Oxygen Index	27	%	ASTM D2863

Additional Information
The value listed as Mold Shrink, Linear-Flow, ASTM D955 was tested according to the ASTM D6289 standard.The value listed as Comparative Tracking Index, UL 746 was tested according to ASTM D3638.The value listed as Thermal Conductivity, ASTM C177 was tested according to the ASTM E1461 standard.Post Shrinkage, ASTM D6289, 72hr, 120°C: 0.43%Heat Resistance, ASTM D794: 201°CDrop Ball Impact, PLENCO Method: 98 J/m

Additional Information

The value listed as Mold Shrink, Linear-Flow, ASTM D955 was tested according to the ASTM D6289 standard.The value listed as Comparative Tracking Index, UL 746 was tested according to ASTM D3638.The value listed as Thermal Conductivity, ASTM C177 was tested according to the ASTM E1461 standard.Post Shrinkage, ASTM D6289, 72hr, 120°C: 0.43%Heat Resistance, ASTM D794: 201°CDrop Ball Impact, PLENCO Method: 98 J/m

Injection	Nominal Value	Unit
Suggested Shot Size	20 - 80	%
Rear Temperature	66.0 - 82.0	°C
Front Temperature	82.0 - 99.0	°C
Processing (Melt) Temp	104 - 115	°C
Mold Temperature	165 - 182	°C
Injection Pressure	6.20 - 11.0	MPa
Back Pressure	0.300	MPa
Screw Speed	< 60	rpm
Cushion	3.00	mm

Injection instructions
Injection Time: 3-8 sec

Note Message
1 .	Method A (short time)

Category:	Phenolic , Phenolic
Manufacturer:	Plastics Engineering Co.
Trademark:	Plenco
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	d3Uyui_Plenco-02311-Injection-.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Razalen® P311	Razin™ Engineering Plastics	PP Impact Copolymer	Razalen®
VYTEEN PC 135	Lavergne Group	PC	VYTEEN
APEX® 3200-68NT	Teknor Apex Company	PVC, Flexible	APEX®
Huafon JF-S-AH7025	Huafon Group Co., Ltd.	PUR, Unspecified	Huafon
POCAN® B 3233 HR 000000	LANXESS GmbH	PBT	POCAN®