Order Products : sales@su-jiao.com
THERMOLAST® K TC3TPN (Series: GP/AP)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | KRAIBURG TPE |
| Trademark: | THERMOLAST® K |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | d34s67_THERMOLAST-K-TC3TPN-Series-GP-AP-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The GP/AP Series is your material solution for technical applications with excellent adhesion to PP. The compounds are available in natural and black colors. Typical applications
Material advantages
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.10 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 28 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Yield) | 3.50 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 620 | % | ISO 37 |
| Tear Strength 3 | 8.0 | kN/m | ISO 34-1 |
| Compression Set 4 | ISO 815 | ||
| 23°C, 72 hr | 10 | % | ISO 815 |
| 70°C, 24 hr | 30 | % | ISO 815 |
| 100°C, 24 hr | 75 | % | ISO 815 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 - 80.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 180 | °C | |
| Middle Temperature | 200 | °C | |
| Front Temperature | 220 | °C | |
| Mold Temperature | 25.0 - 40.0 | °C | |
| Injection Pressure | 20.0 - 100 | MPa | |
| Back Pressure | 2.00 - 10.0 | MPa |
| Note Message | |
|---|---|
| 1 . | Type S2, 200 mm/min |
| 2 . | Type S2, 200 mm/min |
| 3 . | Method B, right-angle specimen (cut) |
| 4 . | Method A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinpolene MBW3422 | Teknor Apex Asia Pacific PTE. LTD. | LDPE | Sinpolene |
| Veroplas VGR20 | PlastxWorld Inc. | ABS | Veroplas |
| Hifax EPR 60 BIANCO | LyondellBasell Industries | PP Copolymer | Hifax |
| PERCOM® DHG40 | A. Schulman Europe | PP Homopolymer | PERCOM® |
| PLUSTEK PA303G4 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
