Order Products : sales@su-jiao.com
EVALENE® HDPE HJ20571
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | JG Summit Petrochemical Corporation |
| Trademark: | EVALENE® HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | d2Gmbg_EVALENE-HDPE-HJ20571.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HDPE is used to make large drums, bleach bottles, shopping bags, crates nets and pails. Tough. Rigid. Heavy Duty. With High Chemical Resistance. These qualities make Evalene® HDPE suitable for a diverse line of industrial products. Blown Film: Shopping and grocery bags Pipes: Pressure and non-pressure pipes Blow Molding: Bottles for household and industrial chemicals, large drums Injection Molding: Pallets, crates, cases, trays, toys, houseware, caps |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.957 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(Injection Molded) | 900 | MPa | ASTM D638 |
| Tensile Strength 2(Yield, Injection Molded) | 24.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Injection Molded) | 350 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 40 | J/m | ASTM D256 |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ProvaMed® PVC 5377 | ACTEGA GmbH | PVC, Unspecified | ProvaMed® PVC |
| Trexprene® A40CW | Mitsubishi Chemical Performance Polymers, Inc. | TPV | Trexprene® |
| ALCOM® PA66 910/1.1 CF20 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
| Cevian®-V 462M | Daicel Polymer Ltd. | ABS | Cevian®-V |
| Heraflex® A 70-21-22 | Radici Plastics | SEBS | Heraflex® |
