Order Products : sales@su-jiao.com

VECTOR® 4213

Category:	SIS+SI , Styrene Isoprene Styrene + SI Block Copolymer
Manufacturer:	Dexco Polymers LP
Trademark:	VECTOR®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	cyLOgt_VECTOR-4213.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Blend of SIS triblock and SI diblock copolymer Medium styrene copolymer Outstanding thermal stability Outstanding melt processability Complies with U.S. FDA 21 CFR 177.1810; Consult the regulations for complete details VECTOR 4213 is a blend of SIS triblock and SI diblock copolymer with a medium styrene content targeted at 25%. It provides enhanced cohesive strength and heat resistance. These properties provide a compounder wide formulating options in formulating hot melt adhesive with higher strength and lower viscosity which are very desirable attributes for disposable adhesive applications.

Message

Blend of SIS triblock and SI diblock copolymer

Medium styrene copolymer

Outstanding thermal stability

Outstanding melt processability

Complies with U.S. FDA 21 CFR 177.1810; Consult the regulations for complete details

VECTOR 4213 is a blend of SIS triblock and SI diblock copolymer with a medium styrene content targeted at 25%. It provides enhanced cohesive strength and heat resistance. These properties provide a compounder wide formulating options in formulating hot melt adhesive with higher strength and lower viscosity which are very desirable attributes for disposable adhesive applications.

General Information
Features	Block Copolymer Low viscosity Rigidity, high Workability, good Thermal stability, good
Uses	Mixing Adhesive
Agency Ratings	FDA 21 CFR 177.1810
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.940	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	12	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 1 sec)	51		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (300% Strain)	2.76	MPa	ASTM D412
Tensile Strength (Yield)	13.1	MPa	ASTM D412
Tensile Elongation (Break)	1200	%	ASTM D412

Additional Information
Styrene, Dexco Test Method: 25% Wt.Diblock Content, Dexco Test Method: 25% Wt.Ash, ASTM D1416: 0.3% Wt.

Resin Grade	Manufacturer	Category	Trademark
RTP 203 TE 18 SI 2	RTP Company	Nylon 66	RTP
Maxxam™ NM-818.H001-8046	PolyOne Corporation	PP, Unspecified	Maxxam™
Ultrason® S 2010	BASF Corporation	PSU	Ultrason® S
EVATHENE® UE653-04	USI Corporation	EVA	EVATHENE®
NYLOY® PG-0220B	Nytex Composites Co., Ltd.	PP, Unspecified	NYLOY®