Order Products : sales@su-jiao.com
Petrothene® GA594189
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Petrothene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cvPeKp_Petrothene-GA594189.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Petrothene GA594189 is a pelletized LLDPE copolymer resin for injection molding thin-walled items requiring high flow and short cycle times. GA594189 exhibits excellent flow, warp resistance and surface appearance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.933 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 140 | g/10 min | ASTM D1238 |
| Spiral Flow | 67.1 | cm | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 61 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 16.5 | MPa | |
| Break | 13.8 | MPa | |
| Tensile Elongation 2(Yield) | 10 | % | ASTM D638 |
| Flexural Modulus 3 | ASTM D790 | ||
| 1% Secant | 627 | MPa | |
| 2% Secant | 545 | MPa |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 51.1 | °C | ASTM D648 |
| Brittleness Temperature | -55.6 | °C | ASTM D746 |
| Vicat Softening Temperature | 86.7 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 177 | °C | |
| Middle Temperature | 191 | °C | |
| Front Temperature | 204 | °C | |
| Nozzle Temperature | 204 | °C |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULAMID® 66 GF 30 GID | A. Schulman Europe | Nylon 66 | SCHULAMID® |
| Sumikon® EME-7720TA | Sumitomo Bakelite Co., Ltd. | Epoxy | Sumikon® |
| Excelprene® GE-9538L | S&E Specialty Polymers, LLC | PVC, Unspecified | Excelprene® |
| IROGRAN® A 92 E 4246 | Huntsman Corporation | TPU-Polyester | IROGRAN® |
| POLYCHIM G 10 CS | POLYCHIM INDUSTRIES | PP Homopolymer | POLYCHIM |
