Order Products : sales@su-jiao.com
Veradel® 3100
| Category: | PESU , Polyethersulfone |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Veradel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | criyw2_Veradel3100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Veradel 3100 polyethersulfone (PESU) is a transparent resin with very low melt flow rate and high thermal deformation temperature, excellent toughness and dimensional stability, and is resistant to water vapor, boiling water and inorganic acid. Other excellent characteristics include thermal stability, creep resistance and inherent flame retardancy. Other available grades are: low melt flow rate grade 3200 Veradel; Medium melt flow rate grade Veradel 3300, recommended for conventional injection molding; High melt flow rate grade Veradel 3400, which is easy to process into thin-walled or long flow distance parts; Very high melt flow rate grades are Veradel 3600, and compounding is recommended, especially glass fiber or carbon fiber reinforced composites. The brand was originally Gafone™PESU sales. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.37 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (380°C/2.16 kg) | 10 - 13 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.60 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.56 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2600 | MPa | ASTM D638 |
| Tensile Strength | 91.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 50 | % | ASTM D638 |
| Flexural Modulus | 2700 | MPa | ASTM D790 |
| Flexural Strength | 124 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 70 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Annealed) | 200 | °C | ASTM D648 |
| Melting Temperature | 225 | °C | |
| CLTE - Flow | 5.7E-5 | cm/cm/°C | ASTM D696 |
| Maximum Service Temperature | 180 | °C | UL 746B |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+14 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | 16 | kV/mm | ASTM D149 |
| Dielectric Constant (60 Hz) | 3.20 | ASTM D150 | |
| Dissipation Factor (60 Hz) | 4.0E-3 | ASTM D150 | |
| Arc Resistance | 50.0 | sec | ASTM D495 |
| Comparative Tracking Index | 150 | V | ASTM D3638 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating 1(0.8 mm) | V-0 | UL 94 | |
| Oxygen Index | 40 | % | ASTM D2863 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 177 | °C | |
| Drying Time | 2.5 | hr | |
| Processing (Melt) Temp | 343 - 385 | °C | |
| Mold Temperature | 149 - 163 | °C | |
| Injection Rate | Fast | ||
| Screw Compression Ratio | 2.0:1.0 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 177 | °C | |
| Drying Time | 2.5 | hr | |
| Cylinder Zone 1 Temp. | 335 - 391 | °C | |
| Cylinder Zone 2 Temp. | 335 - 391 | °C | |
| Cylinder Zone 3 Temp. | 335 - 391 | °C | |
| Cylinder Zone 4 Temp. | 335 - 391 | °C | |
| Cylinder Zone 5 Temp. | 335 - 391 | °C | |
| Adapter Temperature | 327 - 371 | °C | |
| Melt Temperature | 343 - 391 | °C | |
| Die Temperature | 327 - 371 | °C |
| Note Message | |
|---|---|
| 1 . | These flammability ratings do not represent the risk of these materials or any other materials in actual fire situations. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® HDB 502 Phillips Process | Marco Polo International, Inc. | HDPE | MARPOL® |
| TOTAL Polypropylene PPH 3825WZ | TOTAL Refining & Chemicals | PP Homopolymer | TOTAL Polypropylene |
| TECHNYL® A 50X1 GREY 2572 | Solvay Engineering Plastics | Nylon 66 | TECHNYL® |
| Stanyl® HFX61S | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| LNP™ THERMOCOMP™ 2X04505 compound | SABIC Innovative Plastics | ETFE | LNP™ THERMOCOMP™ |
