Order Products : sales@su-jiao.com
WPP PP PPH3MG3.7
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Washington Penn Plastic Co. Inc. |
| Trademark: | WPP PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cmqIH3_WPP-PP-PPH3MG3-7.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| WPP PP PPH3MG3.7 is a Polypropylene Homopolymer (PP Homopolymer) product filled with 37% glass\mica. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of WPP PP PPH3MG3.7 include automotive and industrial applications. Primary characteristic: homopolymer. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 7.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 66.2 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 12 | % | ASTM D638 |
| Flexural Modulus - Tangent | 6270 | MPa | ASTM D790 |
| Flexural Strength | 103 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 80 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C, 3.18 mm) | 460 | J/m | ASTM D256 |
| Gardner Impact (23°C) | 0.904 | J | ASTM D3029 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 158 | °C | |
| 1.8 MPa, Unannealed | 142 | °C |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TechnoFiber PP LGF40-10 HI | TechnoCompound GmbH | PP, Unspecified | TechnoFiber |
| NORYL™ WCD883A resin | SABIC Innovative Plastics Asia Pacific | PPE+TPE | NORYL™ |
| ASTATAL™ F2054 | Marplex Australia Pty. Ltd. | Acetal (POM) Homopolymer | ASTATAL™ |
| Laprene® 83FM00A40 | SO.F.TER. SPA | SEBS | Laprene® |
| Plenco 00714 (Injection) | Plastics Engineering Co. | Mel Phenolic | Plenco |
