Order Products : sales@su-jiao.com
Quadrant EPP Proteus® ProKnob Finish
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Quadrant Engineering Plastic Products |
| Trademark: | Quadrant EPP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ci07gq_Quadrant-EPP-Proteus-ProKnob-Finish.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Quadrant EPP Proteus® ProKnob Finish is a Polypropylene Homopolymer (PP Homopolymer) product. It is available in North America. Typical application: Food Contact Applications. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 24 hr | < 0.010 | % | |
| Saturation | < 0.010 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1310 | MPa | ASTM D638 |
| Tensile Strength (Ultimate) | 33.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 11 | % | ASTM D638 |
| Flexural Modulus | 1340 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 33.1 | MPa | ASTM D790 |
| Compressive Modulus | 1380 | MPa | ASTM D695 |
| Compressive Strength (10% Strain, 23°C) | 34.5 | MPa | ASTM D695 |
| Coefficient of Friction (vs. Steel - Static) | 0.25 | Internal Method |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 64 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 98.9 | °C | ASTM D648 |
| Maximum Use Temperature - Long Term, Air | 82 | °C | |
| Peak Crystallization Temperature (DSC) | 164 | °C | ASTM D3418 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+15 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.18 mm, Estimated Rating) | HB | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BMC 501E | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| Epoxies, Ect. 20-2101 (Enterable Gel) | Epoxies, Etc. | PUR, Unspecified | Epoxies, Ect. |
| IROGRAN® A 88 H 4622 | Huntsman Corporation | TPU-Polyester | IROGRAN® |
| LNP™ COLORCOMP™ M1000S compound | SABIC Innovative Plastics | PP, Unspecified | LNP™ COLORCOMP™ |
| LNP™ STAT-KON™ RD000IXP compound | SABIC Innovative Plastics | Nylon 66 | LNP™ STAT-KON™ |
