Order Products : sales@su-jiao.com
ARMAMID® PA 6-2UP
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Poly Plastic |
| Trademark: | ARMAMID® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ccqZp5_ARMAMID-PA-6-2UP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ARMAMID® PA 6-2UP is a Polyamide 6 (Nylon 6) product. It is available in Europe. Typical application: Film. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.09 | g/cm³ | |
| Molding Shrinkage | 1.3 to 2.2 | % | |
| Water Absorption | |||
| Saturation, 23°C | 8.2 | % | |
| Equilibrium, 23°C, 50% RH | 3.0 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress (Yield) | 50.0 | MPa | |
| Tensile Strain (Break) | 40 | % | |
| Flexural Modulus (23°C) | 1900 | MPa | |
| Flexural Stress | 62.0 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| -40°C | 18 | kJ/m² | |
| 20°C | 24 | kJ/m² | |
| Charpy Unnotched Impact Strength (-40°C) | No Break |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 125 | °C | |
| Melting Temperature | 213 | °C |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Surface Resistivity | |||
| -- 1 | 1.0E+13 | ohms | |
| -- 2 | 1.0E+15 | ohms | |
| Volume Resistivity | |||
| -- 3 | 1.0E+17 | ohms·cm | |
| -- 4 | 1.0E+15 | ohms·cm | |
| Electric Strength | 22 to 24 | kV/mm |
| Note Message | |
|---|---|
| 1 . | Wet |
| 2 . | Dry |
| 3 . | Wet |
| 4 . | Dry |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEPAZ™ LH40 | Mando Advanced Materials Co., Ltd. | PP Homopolymer | SEPAZ™ |
| Ultradur® B 4300 G4 LS High Speed BK15045 | BASF Corporation | PBT | Ultradur® |
| KOPA® KN133G15BL | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
| Sumikon® PM-TX110 | SBHPP | Phenolic | Sumikon® |
| LNP™ LUBRICOMP™ OCP36F compound | SABIC Innovative Plastics | PPS, Linear | LNP™ LUBRICOMP™ |
