Order Products : sales@su-jiao.com
ADDILENE H 420 M 40
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | ADDIPLAST |
| Trademark: | ADDILENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ccWNTW_ADDILENE-H-420-M-40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ADDILENE H 420 M 40 is a Polypropylene Homopolymer (PP Homopolymer) material filled with mineral. It is available in Africa & Middle East, Asia Pacific, Europe, or Latin America. Primary attribute of ADDILENE H 420 M 40: Heat Resistant. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.21 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 78 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield | 30.0 | MPa | |
| Break | 28.0 | MPa | |
| Tensile Strain (Break) | 7.0 | % | ISO 527-2 |
| Flexural Modulus | 4000 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 2.5 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | 24 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact Strength | 2.5 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 132 | °C | ISO 75-2/Be |
| 1.8 MPa, Unannealed | 80.0 | °C | ISO 75-2/Af |
| Vicat Softening Temperature | 152 | °C | ISO 306/A50 |
| Ball Indentation Temperature | 134 | °C | IEC 60335-1 |
| Melting Temperature (DSC) | 165 to 168 | °C | ISO 3146 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index (Solution A) | > 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glow Wire Ignition Temperature | 750 | °C | IEC 60695-2-13 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sorona® FG3015G NC010 | DuPont Performance Polymers | PTT | Sorona® |
| SUSTATRON PPS | Röchling Sustaplast SE & Co. KG | PPS | SUSTATRON |
| FORMION® FI 390 | A. Schulman Inc. | Ionomer | FORMION® |
| Epocast 1610-A1 | Huntsman Advanced Materials | Epoxy | Epocast |
| ESENTTIA 60C55ND | Polipropileno del Caribe S.A. | PP Impact Copolymer | ESENTTIA |
