Order Products : sales@su-jiao.com

RenPIM® VG 5286 Polyol/ 5286 Isocyanate

Category:	PUR, Unspecified , Polyurethane
Manufacturer:	Huntsman Advanced Materials
Trademark:	RenPIM®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	cbcRs2_RenPIM-VG-5286-Polyol-5286-Isocyanate.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
A fast curing 2-component Polyurethane casting system for use in vacuum casting equipment to simulate the appearance and physical properties of a wide range of engineering thermoplastics for rapid prototyping or short series production. RenPIM® Vacuum Grade allows you to produce thermoplastic like parts without the high cost of steel moulds and press. Parts are made within minutes at low cost giving you time and cost savings. The high quality parts made from RenPIM® Vacuum Grade are dimensionally stable and accurately reproduce fine surface detail and textures. You can choose materials from a clear and concise product range at competitive prices to suit your requirements. The products are well proven, thoroughly tested and endorsed by MCP.

Message

A fast curing 2-component Polyurethane casting system for use in vacuum casting equipment to simulate the appearance and physical properties of a wide range of engineering thermoplastics for rapid prototyping or short series production.

RenPIM® Vacuum Grade allows you to produce thermoplastic like parts without the high cost of steel moulds and press.

Parts are made within minutes at low cost giving you time and cost savings.

The high quality parts made from RenPIM® Vacuum Grade are dimensionally stable and accurately reproduce fine surface detail and textures.

You can choose materials from a clear and concise product range at competitive prices to suit your requirements.

The products are well proven, thoroughly tested and endorsed by MCP.

General Information
Features	Good Dimensional Stability High Heat Resistance
Appearance	Black
Forms	Pellets
Processing Method	Vacuum Casting

Hardness	Nominal Value		Test Method
Shore Hardness (Shore D, 23°C)	80		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break)	70.0	MPa	ISO 527-2
Tensile Strain (Break)	14	%	ISO 527-2
Flexural Modulus	2000	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)	140	°C	ISO 75-2/A

Thermoset	Nominal Value	Unit
Pot Life (40°C)	6.0	min
Demold Time (70°C)	45	min

Additional Information	Nominal Value	Unit
Maximum Layer Thickness	1.00	cm
Mixing Ratio	100:150

Resin Grade	Manufacturer	Category	Trademark
Sanren F500EPS (On-spec.)	SINOPEC Shanghai Petrochemical Co. Ltd.	PP Random Copolymer	Sanren
Grupo IDESA HIPS HI-360-S-01	Grupo IDESA, S.A. de C.V.	SBC	Grupo IDESA HIPS
Karina WHITE PVC COMPOUND 837-10/119-E-ERYB	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
LubriOne™ NN-000/01M black SO	PolyOne Corporation	Nylon 66	LubriOne™
Dow Corning® MG 7-9900	Dow Corning Corporation	Silicone	Dow Corning®