Order Products : sales@su-jiao.com
Polene LDPE S 1018
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | TPI Polene Public Company Limited |
| Trademark: | Polene LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cbNFf1_Polene-LDPE-S-1018.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polene LDPE S 1018 is a Low Density Polyethylene material. It is available in Asia Pacific or North America for injection molding. Important attributes of Polene LDPE S 1018 are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.916 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 48 | DIN 53505 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 9.50 | MPa | |
| Break | 8.50 | MPa | |
| Tensile Elongation (Break) | 400 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 82.0 | °C | ASTM D1525 |
| Melting Temperature | 100 to 110 | °C | ASTM D1238 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 170 to 210 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205 A SI 2 | RTP Company | Nylon 6 | RTP |
| Softflex® 0954 | Network Polymers, Inc. | TPE | Softflex® |
| Addisil™ 2070 E | Momentive Performance Materials Inc. | Rubber | Addisil™ |
| Braskem PP ZS-751 | Braskem America Inc. | PP Homopolymer | Braskem PP |
| EPO-TEK® 330 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
