Order Products : sales@su-jiao.com

POYAD DS201

Category:	Polyolefin, Unspecified , Polyolefin
Manufacturer:	Pooya Polymer Tehran
Trademark:	POYAD
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	cb0Lvx_POYAD-DS201.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Desiccant MB Description POYAD DS201 is an advanced moisture absorber MB eliminates moisture effects on PE blown/cast film, PE and PP injection molding, blow molding, sheet/profile extrusion and etc. It's widely used for recycling and damped plastics. Application POYAD DS201 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-bending. Meanwhile it can absorb moisture 20% of its own weight, it can be used from 1 to 8%, however 3% is recommended. Use the mixture of this product within 24 hours and heat seal the opened bags immediately to keep its efficiency. Store in clean, dry and cool place, out of sun exposure not to exceed 6 months. Don't use opened or damaged packages before drying.

Message

Desiccant MB

Description
POYAD DS201 is an advanced moisture absorber MB eliminates moisture effects on PE blown/cast film, PE and PP injection molding, blow molding, sheet/profile extrusion and etc. It's widely used for recycling and damped plastics.

Application
POYAD DS201 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-bending.
Meanwhile it can absorb moisture 20% of its own weight, it can be used from 1 to 8%, however 3% is recommended.
Use the mixture of this product within 24 hours and heat seal the opened bags immediately to keep its efficiency. Store in clean, dry and cool place, out of sun exposure not to exceed 6 months. Don't use opened or damaged packages before drying.

General Information
Uses	Masterbatch
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density	1.60	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	2.0	g/10 min	ASTM D1238
Moisture Content	< 1000	ppm	ASTM D644

Additional Information	Nominal Value	Unit	Test Method
Dispersion	OK		Internal Method
Pellet Size	30.0 to 40.0	pcs/cm³	Internal Method

Resin Grade	Manufacturer	Category	Trademark
Sylvin 5145-90 CLEAR YELLOW 4112	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
TOTAL Polypropylene Lumicene® MR 60MC2	TOTAL Refining & Chemicals	PP Random Copolymer	TOTAL Polypropylene
NILSAN S GP	Taro Plast S.p.A.	ABS	NILSAN
AKROTEK® PEEK natural (4447)	AKRO-PLASTIC GmbH	PEEK	AKROTEK®
COSMOTHENE® F210	TPC, The Polyolefin Company (Singapore) Pte Ltd	LDPE	COSMOTHENE®