Order Products : sales@su-jiao.com
EMERGE™ PC/ABS 7800
| Category: | PC+ABS , Advanced Resin |
| Manufacturer: | Trinseo |
| Trademark: | EMERGE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cayWDE_EMERGE-PC-ABS-7800.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EMERGETM PC/ABS 7800 Advanced Resin is an ignition-resistance PC/ABS blend that contains no chlorine or bromine additives. It contains up to 40% of post consumer recycle (PCR) polycarbonate. This resin is suitable for use in a wide variety of applications in the information technology equipment and consumer electronics markets. Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 12 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 to 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 60.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 50 | % | ASTM D638 |
| Flexural Modulus | 2620 | MPa | ASTM D790 |
| Flexural Strength | 84.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 640 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 92.2 | °C | |
| 1.8 MPa, Unannealed | 81.1 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating 1(1.70 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Mold Temperature | 40.0 to 60.0 | °C |
| Note Message | |
|---|---|
| 1 . | This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rainmaker Polypropylene MCHPGL40 | Rainmaker Polymers LLC | PP Homopolymer | Rainmaker Polypropylene |
| Stanyl® TS256F6 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| EUROPLEX® Sheet F6 | Evonik Industries AG | PC | EUROPLEX® Sheet |
| ExxonMobil™ PP7555KNE2 | ExxonMobil Chemical | PP Impact Copolymer | ExxonMobil™ |
| EcolGreen EGP-210 | EcolBiotech Co., Ltd | PLA | EcolGreen |
