Order Products : sales@su-jiao.com
Elastofoam® 38100R / 3120T
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | BASF Corporation |
| Trademark: | Elastofoam® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cQZad3_Elastofoam38100R3120T.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Low density I-skin foam system (natural color) HFC 245fa-blown, two-component microcellular polyurethane foam system designed for molding of miscellaneous Integral Skin articles that require good skin at relatively low molded densities. Depending on the application requirements and the processing conditions this system can provide
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | ASTM D1622 | ||
| -- 1 | 0.256 | g/cm³ | ASTM D1622 |
| -- 2 | 0.320 | g/cm³ | ASTM D1622 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A 3 | 45 | ASTM D2240 | |
| Shaw A 4 | 55 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D412 | ||
| Yield 5 | 1.17 | MPa | ASTM D412 |
| Yield 6 | 1.86 | MPa | ASTM D412 |
| Tensile Elongation 7(Break) | 130 | % | ASTM D412 |
| Tear Strength | ASTM D624 | ||
| -- | 4.03 | kN/m | ASTM D624 |
| -- | 5.78 | kN/m | ASTM D624 |
| Cracking 8 | 1.6 | kN/m | ASTM D624 |
| Cracking 9 | 2.1 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 70°C, 22 hr 10 | 15 | % | ASTM D395B |
| 70°C, 22 hr 11 | 10 | % | ASTM D395B |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate | FMVSS 302 | ||
| -- 12 | 0.0 | mm/min | FMVSS 302 |
| -- 13 | 0.0 | mm/min | FMVSS 302 |
| Additional Information |
|---|
| Processing parameters: Mix Ratio (Resin/Isocyanate): 100/38 pbw Isocyanate Temperature: 75 to 95°F Resin Temperature: 75 to 90°F Mold Temperature: 75 to 110°F Demold Time: 5 to 6 min Liquid Component: Density, Resin at 25°C, ASTM D1638: 1.05 g/cm³ Density, Isocyanate at 25°C, ASTM D1638: 1.20 g/cm³ Viscosity, Resin at 25°C, ASTM D2196: 500 cP Viscosity, Isocyanate at 25°C, ASTM D2196: 150 cP Hand Mix at 77°F: Cream Time: 20 sec Top of Cup: 50 sec Gel Time: 70 sec Rise Time: 110 sec Tack Free Time: 130 sec Free Rrise Density: 7.0 lb/ft³ High Pressure at 77°F: Cream Time: 13 sec Top of Cup: 35 sec Gel Time: 50 sec Rise Time: 75 sec Tack Free Time: 100 sec Free Rrise Density: 6.5 lb/ft³ |
| Note Message | |
|---|---|
| 1 . | Hand Mix |
| 2 . | High Pressure |
| 3 . | Hand Mix |
| 4 . | High Pressure |
| 5 . | Hand Mix |
| 6 . | High Pressure |
| 7 . | Hand Mix |
| 8 . | Hand Mix |
| 9 . | High Pressure |
| 10 . | Hand Mix |
| 11 . | High Pressure |
| 12 . | Hand Mix |
| 13 . | High Pressure |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 285B TFE 13 SI 2 | RTP Company | Nylon 610 | RTP |
| Nypol® PA B3 T40 NTLA010 NT395 | Petropol Industry and Trade of Polymers LTDA | Nylon 6 | Nypol® PA |
| Chiao Fu PA66/6 MB312G33 BK | Chiao Fu Enterprises Co., Ltd. | Nylon 66/6 | Chiao Fu PA66/6 |
| PLANAC BT-1015-02 | TOYOBO America, Inc. | PBT | PLANAC |
| Thermec N™ 4340CF10 | Technical Polymers, LLC | PPA | Thermec N™ |
