Order Products : sales@su-jiao.com

LIM™ 6041

Category:	Silicone Rubber, LSR , Silicone Rubber, LSR
Manufacturer:	Momentive Performance Materials Inc.
Trademark:	LIM™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	cOhtd1_LIM-6041.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
LIM6041 liquid silicone rubber is a 2 component Radio - Opaque product formulated with Barium Sulfate. It is used in liquid injection molding of high performance elastomeric parts. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications in medical devices where molded parts can be detected under X-ray due it's radio opacity. Key Features and Benefits Barium Sulfate filled for excellent radio - opacity Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 1500C (3020F) to 2050C (4000F) Excellent release from metal molds Potential Applications The combination of excellent tear strength and radio - opacity, it is suitable for applications in medical devices such as wound drain catheters, where molded parts can be detected under X-ray.

Message

LIM6041 liquid silicone rubber is a 2 component Radio - Opaque product formulated with Barium Sulfate. It is used in liquid injection molding of high performance elastomeric parts. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications in medical devices where molded parts can be detected under X-ray due it's radio opacity.

Key Features and Benefits

Barium Sulfate filled for excellent radio - opacity

Excellent tear strength

Convenient 1:1 mix ratio for use with automatic equipment

Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature

Wide range of molding temperatures: 1500C (3020F) to 2050C (4000F)

Excellent release from metal molds

Potential Applications
The combination of excellent tear strength and radio - opacity, it is suitable for applications in medical devices such as wound drain catheters, where molded parts can be detected under X-ray.

General Information
Filler / Reinforcement	Barium Sulfate
Features	Fast Cure Good Mold Release Good Tear Strength High Tensile Strength
Uses	Medical/Healthcare Applications
Agency Ratings	BfR Food Contact, Unspecified Rating FDA 21 CFR 177.2600 USP Class VI
Appearance	Opaque
Forms	Liquid
Processing Method	Liquid Injection Molding (LIM)

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Uncured Properties	Nominal Value	Unit
Color	White
Density	1.19	g/cm³

Cured Properties	Nominal Value	Unit
Shore Hardness ¹(Shore A)	44
Tensile Strength ²	7.14	MPa
Tear Strength ³	33.9	kN/m

Note Message
1 .	As Molded 30 sec @ 177°C (350°F)
2 .	As Molded 30 sec @ 177°C (350°F)
3 .	As Molded 30 sec @ 177°C (350°F)

Resin Grade	Manufacturer	Category	Trademark
RTP 4103	RTP Company	PEKK	RTP
Sarlink® TPV 24580	Teknor Apex Company	TPV	Sarlink® TPV
VECTOR® 4411-D	Dexco Polymers LP	SIS	VECTOR®
Hyosung Polyketone M230A	Hyosung Corporation	PK-Aliphatic	Hyosung Polyketone
KMI 223L	KMI Group, Inc.	ABS	KMI