Menzolit® SMC 2500 Datasheet,Polyester, TS,Menzolit Ltd (UK)-SHANGHAI SUSHENG

Menzolit® SMC 2500

Category:	Polyester, TS , Thermoset Polyester
Manufacturer:	Menzolit Ltd (UK)
Trademark:	Menzolit®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	cOUgSY_Menzolit-SMC-2500.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Menzolit® SMC 2500 is a sheet moulding compound based on unsaturated polyester resin. The product is glass fibre reinforced and contains mineral fillers. In case of fire the product doesn't melt, neither does it form droplets nor is smoke generation excessive. The material is compression moulded in heated steel moulds. It is recommended to work with chrome plated tools. The product contains no halogens. Menzolit® SMC 2500 is a special SMC for high voltage isolating applications. The glass level has been selected to combine good mouldability with good strength and stiffness properties. Even without a specific fire retardant, the fire retardancy level HB according to UL 94 is achieved. The electrical properties have been improved to achieve high isolating properties. When moulding this material, a high moulding pressure is very important. Only highly densified material guaranties the high isolating properties. Typical applications are isolating components and functional components within high voltage power systems. The material can be used within a SF6 atmosphere.

Message

Menzolit® SMC 2500 is a sheet moulding compound based on unsaturated polyester resin. The product is glass fibre reinforced and contains mineral fillers. In case of fire the product doesn't melt, neither does it form droplets nor is smoke generation excessive. The material is compression moulded in heated steel moulds. It is recommended to work with chrome plated tools. The product contains no halogens.

Menzolit® SMC 2500 is a special SMC for high voltage isolating applications. The glass level has been selected to combine good mouldability with good strength and stiffness properties. Even without a specific fire retardant, the fire retardancy level HB according to UL 94 is achieved. The electrical properties have been improved to achieve high isolating properties. When moulding this material, a high moulding pressure is very important. Only highly densified material guaranties the high isolating properties. Typical applications are isolating components and functional components within high voltage power systems. The material can be used within a SF6 atmosphere.

General Information
Filler / Reinforcement	Glass\Mineral, 25% Filler by Weight
Features	Flame Retardant Good Electrical Properties Good Moldability Good Stiffness Good Strength Halogen Free High Heat Resistance Low Smoke Emission
Uses	Electrical/Electronic Applications
Appearance	Colors Available
Forms	SMC - Sheet Molding Compound
Processing Method	Compression Molding
Part Marking Code (ISO 11469)	>UP-(MD+GF)67<

Physical	Nominal Value	Unit	Test Method
Density	1.80	g/cm³	ISO 1183
Molding Shrinkage
-- ¹	0.0	%	DIN 53464
--	0.050	%	ISO 2577
Water Absorption (Saturation, 23°C)	< 0.30	%	ISO 62

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (Compression Molded)	11000	MPa	ISO 527-2
Tensile Stress (Yield, Compression Molded)	60.0	MPa	ISO 527-2
Flexural Modulus (Compression Molded)	9000	MPa	ISO 178
Flexural Stress (Compression Molded)	145	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (Compression Molded)	65	kJ/m²	ISO 179

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)	> 200	°C	ISO 75-2/A
Continuous Use Temperature	165	°C	Internal Method
Glass Transition Temperature	170	°C	DSC
CLTE - Flow	1.2E-5	cm/cm/°C	ISO 11359-2

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+13	ohms	IEC 60093
Volume Resistivity	1.0E+16	ohms·cm	IEC 60093
Electric Strength	36	kV/mm	IEC 60243-1
Dissipation Factor	0.010		IEC 60250
Comparative Tracking Index	600	V	IEC 60112

Flammability	Nominal Value	Unit	Test Method
Flame Rating (3.00 mm)	HB		UL 94
Oxygen Index	22	%	ISO 4589-2

Injection	Nominal Value	Unit
Mold Temperature	135 to 150	°C
Injection Pressure	20.0 to 25.0	MPa

Note Message
1 .	Post Molding Shrinkage

Resin Grade	Manufacturer	Category	Trademark
Rilsan® HT CMNO TL	Arkema	PPA	Rilsan® HT
Alcryn® 1070 BK	Advanced Polymer Alloys	MPR	Alcryn®
Axplas® MEP52 0075	Axion Polymers	TP, Unspecified	Axplas®
Generic Nylon 66 - Aramid Fiber	Generic	Nylon 66	Generic
Kuraray Poval® PVA 205	Kuraray Co., Ltd.	PVOH	Kuraray Poval®

Resin Grade

Manufacturer