Order Products : sales@su-jiao.com
RTP 201.3A HS
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cL9PdC_RTP-201-3A-HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| 3.18mm, injection molding | 0.50 | % | ASTM D955 |
| 6.35mm, injection molding | 0.80 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 1.3 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 118 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 6550 | MPa | ASTM D638 |
| Tensile Strength | 110 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 3.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 4820 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 158 | MPa | ASTM D790 |
| Compressive Strength | 117 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 64 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 530 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, injection molded | 207 | °C | ASTM D648 |
| 1.8 MPa, unannealed, injection molded | 193 | °C | ASTM D648 |
| CLTE - Flow | 4.5E-5 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.37 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+14 | ohms·cm | ASTM D257 |
| Dielectric Strength 1 | 20 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 3.70 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 0.019 | ASTM D150 | |
| Arc Resistance | 112 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Additional Information |
|---|
| The value listed as Flammibility, UL 94, was tested in accordance with RTP Company methods. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 221 - 271 | °C | |
| Middle Temperature | 221 - 271 | °C | |
| Front Temperature | 221 - 271 | °C | |
| Mold Temperature | 54.0 - 93.0 | °C | |
| Injection Pressure | 69.0 - 103 | MPa |
| Note Message | |
|---|---|
| 1 . | Method A (short time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinpolene MBW1674 | Teknor Apex Asia Pacific PTE. LTD. | PP, Unspecified | Sinpolene |
| Sunny® PBT EB230-034 | Guangdong Shunde Shunyan New Material Co., Ltd. | PBT | Sunny® |
| NANCAR® 1042 | Nantex Industry Co., Ltd. | NBR | NANCAR® |
| DIAMALOY ENGINEERED ALLOYS ABS NYLON 4010A | Network Polymers, Inc. | ABS+Nylon | DIAMALOY ENGINEERED ALLOYS |
| Lustran® ABS Guardian™ 620 | INEOS ABS (USA) | ABS | Lustran® ABS |
