Order Products : sales@su-jiao.com
PRL PC/TP-FR3
| Category: | PC+Polyester , Polycarbonate + Polyester |
| Manufacturer: | Polymer Resources Ltd. |
| Trademark: | PRL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cKX3l9_PRL-PC-TP-FR3.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PRL PC/TP-FR3 is a Polycarbonate + Polyester (PC+Polyester) product. It can be processed by injection molding and is available in North America. Characteristics include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.29 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (265°C/2.16 kg) | 12 to 20 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.1 to 1.3 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 3.18 mm | 49.0 | MPa | |
| Break, 3.18 mm | 42.7 | MPa | |
| Flexural Modulus (3.18 mm) | 2070 | MPa | ASTM D790 |
| Flexural Strength (3.18 mm) | 75.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 590 | J/m | ASTM D256 |
| Gardner Impact (3.18 mm) | 36.2 | J | ASTM D3029 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.18 mm | 98.9 | °C | |
| 1.8 MPa, Unannealed, 3.18 mm | 82.2 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 to 116 | °C | |
| Drying Time | 4.0 to 6.0 | hr | |
| Drying Time, Maximum | 8.0 | hr | |
| Rear Temperature | 249 to 271 | °C | |
| Middle Temperature | 254 to 277 | °C | |
| Front Temperature | 260 to 282 | °C | |
| Processing (Melt) Temp | 246 to 274 | °C | |
| Mold Temperature | 65.6 to 87.8 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULAMID® 6 GBF 3010 H | A. Schulman Europe | Nylon 6 | SCHULAMID® |
| TIPELIN® 6000B | MOL Petrochemicals Co. Ltd. | HDPE | TIPELIN® |
| Ultramid® A3U40G5 | BASF Corporation | Nylon 66 | Ultramid® |
| KOPA® KN3311BLK | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
| Polyrocks 5003G15H | Polyrocks Chemical Co., Ltd | PP, Unspecified | Polyrocks |
