Order Products : sales@su-jiao.com
Braskem PE G-803
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cGUshT_Braskem-PE-G-803.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
G803 is a low density polyethylene that does not contain additives. It shows a good dimensional stability and high fluidity being indicated for low viscosity required applications. Application: Masterbatches; Lids, closures, and general purpose injection molding parts. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 30 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 40 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 9.00 | MPa | |
| Break, Compression Molded | 6.00 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 150 | % | ASTM D638 |
| Apparent Bending Modulus | 320 | MPa | ASTM D747 |
| Flexural Modulus - 1% Secant (Compression Molded) | 200 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 85.0 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SILVER® SA-2311 | Guangdong Silver Age Sci & Tech. Co., Ltd | SEBS | SILVER® |
| TUFBET® BGF 30FRO | SRF Ltd. | PBT | TUFBET® |
| EPS Silver® S400R | INEOS Styrenics International SA | PS (EPS) | EPS Silver® |
| Kostrate® EDGE LE | Plastic Selection Group, Inc. | TP, Unspecified | Kostrate® EDGE |
| Sylvin 4225-75 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
