Order Products : sales@su-jiao.com
OP - ABS ABS 25CCF
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Oxford Polymers |
| Trademark: | OP - ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cFcMCu_OP---ABS-ABS-25CCF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
OP - ABS ABS 25CCF is an Acrylonitrile Butadiene Styrene (ABS) material filled with 25% carbon fiber. It is available in North America for injection molding. Important attributes of OP - ABS ABS 25CCF are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.10 to 0.20 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 117 | MPa | |
| Break | 117 | MPa | |
| Flexural Modulus | 11400 | MPa | ASTM D790 |
| Flexural Strength | 145 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (4°C) | 64 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.18 mm | 96.1 | °C | |
| 1.8 MPa, Unannealed, 3.18 mm | 87.8 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.59 mm | V-0 | ||
| 3.18 mm | 5VA |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 71.1 to 82.2 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Rear Temperature | 188 to 210 | °C | |
| Middle Temperature | 204 to 227 | °C | |
| Front Temperature | 216 to 238 | °C | |
| Processing (Melt) Temp | 218 to 249 | °C | |
| Mold Temperature | 48.9 to 71.1 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Michilene F8100GF20-02 | API Polymers, Inc. | PP Homopolymer | Michilene |
| NEXT REGRIND PA66 101L-300RG | NEXT Specialty Resins, Inc. | Nylon 66 | NEXT REGRIND |
| Ablebond 967-1 | Henkel Ablestik | Epoxy | Ablebond |
| CELEX™ 320.N | Trinseo | PC | CELEX™ |
| Elvacite® 2014 | Lucite International Inc. | Acrylic (PMMA) | Elvacite® |
