Category: | Nylon 66 , Polyamide 66 |
Manufacturer: | SABIC Innovative Plastics |
Trademark: | LNP™ LUBRICOMP™ |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | cFa00W_LNPLUBRICOMPRFP36compound.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
LNP LUBRICOMP RFP36 is a compound based on Nylon 66 resin containing Glass Fiber, PTFE, Silicone. Added features of this material include: Internally Lubricated. This product is also known as LUBRICOMP* RFL-4536. Also known as: LNP* LUBRICOMP* Compound RFL-4536 Product reorder name: RFP36 |
General Information | |
---|---|
Filler / Reinforcement |
|
Additive |
|
Features |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 1.48 | g/cm³ | ASTM D792, ISO 1183 |
Molding Shrinkage | |||
Flow : 24 hours | 0.20 | % | ASTM D955 |
Transverse flow : 24 hours | 1.0 | % | ASTM D955 |
Vertical flow direction : 24 hours | 0.97 | % | ISO 294-4 |
Flow direction : 24 hours | 0.21 | % | ISO 294-4 |
Water Absorption | |||
24 hr, 50% RH | 0.78 | % | ASTM D570 |
Equilibrium, 23°C, 50% RH | 1.2 | % | ISO 62 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Modulus | |||
-- 1 | 10500 | MPa | ASTM D638 |
-- | 9800 | MPa | ISO 527-2/1 |
Tensile Strength | |||
Fracture | 133 | MPa | ASTM D638 |
Fracture | 135 | MPa | ISO 527-2 |
Tensile Elongation | |||
Fracture | 2.1 | % | ASTM D638 |
Fracture | 2.2 | % | ISO 527-2 |
Flexural Modulus | |||
-- | 7580 | MPa | ASTM D790 |
-- | 9400 | MPa | ISO 178 |
Flexural Strength | |||
-- | 195 | MPa | ASTM D790 |
-- | 207 | MPa | ISO 178 |
Coefficient of Friction | ASTM D3702 Modified | ||
With self-dynamics | 0.56 | ASTM D3702 Modified | |
With Self-Static | 0.48 | ASTM D3702 Modified | |
Wear Factor - Washer | 11.0 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Notched Izod Impact | |||
23°C | 140 | J/m | ASTM D256 |
23°C 2 | 9.0 | kJ/m² | ISO 180/1A |
Unnotched Izod Impact | |||
23°C | 780 | J/m | ASTM D4812 |
23°C 3 | 50 | kJ/m² | ISO 180/1U |
Instrumented Dart Impact | |||
23°C, Energy at Peak Load | 7.00 | J | ASTM D3763 |
-- | 5.00 | J | ISO 6603-2 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Deflection Temperature Under Load | |||
1.8 MPa, unannealed, 3.20mm | 233 | °C | ASTM D648 |
1.8 MPa, unannealed, 64.0mm span 4 | 236 | °C | ISO 75-2/Af |
Flammability | Nominal Value | Test Method | |
---|---|---|---|
Flame Rating (1.50 mm, Testing by SABIC) | HB | UL 94 |
Injection | Nominal Value | Unit | |
---|---|---|---|
Drying Temperature | 82.2 | °C | |
Drying Time | 4.0 | hr | |
Suggested Max Moisture | 0.15 - 0.25 | % | |
Rear Temperature | 266 - 277 | °C | |
Middle Temperature | 282 - 293 | °C | |
Front Temperature | 293 - 304 | °C | |
Processing (Melt) Temp | 282 - 304 | °C | |
Mold Temperature | 93.3 - 110 | °C | |
Back Pressure | 0.172 - 0.344 | MPa | |
Screw Speed | 30 - 60 | rpm |
Note Message | |
---|---|
1 . | 50 mm/min |
2 . | 80*10*4 |
3 . | 80*10*4 |
4 . | 80*10*4 mm |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
RTP 799 X 112538 | RTP Company | HDPE | RTP |
TRIBIT® 1800 | Samyang Corporation | PBT | TRIBIT® |
GELOY™ FXW751SK resin | SABIC Innovative Plastics | ASA+PC | GELOY™ |
HiFill® PA6 G/C50 A240 BK | Techmer Engineered Solutions | Nylon 6 | HiFill® |
Lifoflex® UVX 50.01 B038-4 | ELASTO | TPE | Lifoflex® |