Order Products : sales@su-jiao.com
Ketron® PEEK-CA30 LSG
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Quadrant Engineering Plastic Products |
| Trademark: | Ketron® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cFZH9o_Ketron-PEEK-CA30-LSG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| KETRON® PEEK-CA30 LSG stock shapes are produced from genuine VICTREX® PEEK polymer. This 30% carbon fibre reinforced grade combines even higher stiffness, mechanical strength and creep resistance than KETRON PEEK-GF30 LSG blue with an optimum wear resistance. KETRON PEEK-CA30 LSG stock shapes have also been successfully type tested for their compliance with both United States Pharmacopeia (USP) and ISO 10993-1 guideline requirements for Biocompatibility Testing of Materials, and they come with full traceability from resin to stock shape. These features, added to an excellent sterilizability by means of steam, dry heat, ethylene oxide, plasma and gamma irradiation, make KETRON PEEK-CA30 LSG stock shapes very suitable for applications in the medical, pharmaceutical and biotechnology markets. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.40 | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | ||
| Saturation, 23°C | 0.12 | % | |
| Equilibrium, 23°C, 50% RH | 0.050 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 102 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 9200 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 144 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 5.0 | % | ISO 527-2 |
| Flexural Stress | 240 | MPa | ISO 178 |
| Compressive Stress (5% Strain) | 170 | MPa | ISO 604 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 260 | °C | ISO 75-2/A |
| Continuous Use Temperature 1 | 250 | °C | |
| Melting Temperature | 340 | °C | ISO 11357-3 |
| CLTE - Flow (23 to 150°C) | 2.5E-4 | cm/cm/°C | |
| Thermal Conductivity | 0.92 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+5 | ohms | IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | Long term in Air |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC V836 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| SureSpec HS-080 | Genesis Polymers | PS (HIPS) | SureSpec |
| Vibrathane® 8094 | Chemtura | PUR-Ester/MDI | Vibrathane® |
| Enviramid® N2330MG15HL BK | Ravago Manufacturing Americas, LLC | Nylon 6 | Enviramid® |
| Jam PE 14XF9 | Jam Petrochemical Company | LLDPE | Jam PE |
