Order Products : sales@su-jiao.com

DOW™ HDPE DMDA-8940 NT 7

Category:	HDPE , High Density Polyethylene Resin
Manufacturer:	The Dow Chemical Company
Trademark:	DOW™ HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	cDfiMo_DOW-HDPE-DMDA-8940-NT-7.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Injection molding

For injection molded housewares, toys, food containers and pails

Excellent balance of toughness, stress crack resistance and processability

Very narrow molecular weight distribution

Complies with U.S. FDA 21 CFR 177.1520 (c)3.2a

Complies with U.S. FDA -DMF

Complies with Canadian HPFB No Objection

Complies with EU, No 10/2011

Consult the regulations for complete details.

DOW DMDA-8940 NT 7 High Density Polyethylene (HDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for use in a broad range of injection molding applications such as housewares, toys, food containers and pails. This resin has been designed to provide an excellent balance of toughness, environmental stress crack resistance and processability.

General Information
Agency Ratings	DMF not rated FDA 21 CFR 177.1520(c) 3.2a HPFB (Canada) No Objection Europe No 10/2011
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.951	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	44	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	64		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield	26.9	MPa	ASTM D638
Fracture	26.9	MPa	ASTM D638
Tensile Elongation			ASTM D638
Yield	5.0	%	ASTM D638
Fracture	10	%	ASTM D638
Flexural Modulus - 2% Secant	1020	MPa	ASTM D790B

Impact	Nominal Value	Unit	Test Method
Tensile Impact Strength ¹	84.1	kJ/m²	ASTM D1822

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	71.1	°C	ASTM D648
Brittleness Temperature	-72.2	°C	ASTM D746
Vicat Softening Temperature	123	°C	ASTM D1525
Melting Temperature (DSC)	128	°C	Internal method
Peak Crystallization Temperature (DSC)	116	°C	Internal method

Additional Information
根据 ASTM D 4976 进行基板模制和测试。

Note Message
1 .	Type s

Resin Grade	Manufacturer	Category	Trademark
Premi-Glas® 3100-22	Premix, Inc.	TS, Unspecified	Premi-Glas®
Arnitel® EB463	DSM Engineering Plastics	TPC-ET	Arnitel®
ChronoFlex® AL 65D	CardioTech International, Inc.	PUR, Unspecified	ChronoFlex®
Durethan® BKV 115 DUS008 000000	LANXESS Corporation	Nylon 6	Durethan®
DURACON® TR-20	Polyplastics Co., Ltd.	Acetal (POM) Copolymer	DURACON®