Tecnoflon® FOR 3390

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	cBHO7c_Tecnoflon-FOR-3390.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® FOR 3390 is a medium viscosity cure incorporated fluoroelastomer terpolymer (FKM) with high fluorine content (70 % wt). Tecnoflon® FOR 3390 is designed for applications requiring outstanding fuel and chemical resistance. Some of the basic properties of Tecnoflon® FOR 3390 are: Good scorch safety Reduced mold fouling Excellent mold release Excellent resistance to fuels Very good heat resistance Very good compression set TECNOFLON® FOR 3390 can be used for compression, injection and transfer moulding of shaft seals, valve stem seals, gaskets or any item requiring excellent chemical resistance. This material can be combined with the cure system and other typical fluoroelastomers compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. TECNOFLON® FOR 3390 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

Message

TECNOFLON® FOR 3390 is a medium viscosity cure incorporated fluoroelastomer terpolymer (FKM) with high fluorine content (70 % wt). Tecnoflon® FOR 3390 is designed for applications requiring outstanding fuel and chemical resistance.

Some of the basic properties of Tecnoflon® FOR 3390 are:

Good scorch safety

Reduced mold fouling

Excellent mold release

Excellent resistance to fuels

Very good heat resistance

Very good compression set

TECNOFLON® FOR 3390 can be used for compression, injection and transfer moulding of shaft seals, valve stem seals, gaskets or any item requiring excellent chemical resistance. This material can be combined with the cure system and other typical fluoroelastomers compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.
TECNOFLON® FOR 3390 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

General Information
Features	Fuel Resistant Good Chemical Resistance Good Mold Release High Heat Resistance Low Compression Set Medium Viscosity Terpolymer
Uses	Belts/Belt Repair Blending Gaskets Hose Profiles Seals Sheet
Appearance	Off-White
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	47	MU
Fluorine Content ²	70	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
PRIMALENE WPP702A	Southern Polymer, Inc.	HDPE	PRIMALENE
Yanshan PE LD117	SINOPEC Beijing Yanshan Petrochemical	LDPE	Yanshan PE
XENOY™ HX5600HP resin	SABIC Innovative Plastics Asia Pacific	PC+PBT	XENOY™
COPYLENE® CH085S	Phillips 66	PP Homopolymer	COPYLENE®
HYDEL® PC-7	Ensinger Inc.	PC	HYDEL®