Order Products : sales@su-jiao.com
3M™ Dyneon™ Fluoroelastomer FC 2181Z
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ Fluoroelastomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cB3BpI_3M-Dyneon-Fluoroelastomer-FC-2181Z.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 3M™ Dyneon™ Fluoroelastomer FC 2181 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2181 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
| General Information |
|---|
| Additives Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.80 | g/cm³ | |
| State at Room Temperature | Solid |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ravamid® R210 GF 30 | Ravago Group | Nylon 66 | Ravamid® |
| Stratasys ULTEM™ 9085 | Stratasys | PEI | Stratasys |
| Cellidor B 510-15 | ALBIS PLASTIC GmbH | CAB | Cellidor |
| Galloo rPS-65 | Galloo Plastics | PS (GPPS) | Galloo |
| Geon™ HTX Ultra LA426 Tan 3725 | PolyOne Corporation | PVC Alloy | Geon™ HTX Ultra |
