Order Products : sales@su-jiao.com
Estane® 58325 TPU
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cAnvFS_Estane-58325-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estane® 58325 is an 85A aromatic Polyether-Based Thermoplastic Polyurethane (TPU). Features: High melt strength for thick sheet extrusion. Uses: Blown and Flat Die/Cast Extrusion, Tubing and Profile Extrusion |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 82 - 88 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 63.0 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (200% Strain) | 10 | % | ASTM D412 |
| Tensile Stress | ASTM D412 | ||
| 100% strain, 0.762mm | 5.50 | MPa | ASTM D412 |
| 300% strain, 0.762mm | 9.70 | MPa | ASTM D412 |
| Tensile Strength (Break, 0.762 mm) | 51.7 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 600 | % | ASTM D412 |
| Tear Strength | |||
| 0.762 mm 1 | 79.4 | kN/m | ASTM D624 |
| Cracking | 25 | kN/m | ASTM D470 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Volume (23°C, 24 hr, in water) | 1.7 | % | ASTM D471 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -44.0 | °C | DSC |
| Melting Temperature | 131 | °C | DSC |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 183 | °C | |
| Cylinder Zone 2 Temp. | 188 | °C | |
| Cylinder Zone 3 Temp. | 194 | °C | |
| Cylinder Zone 4 Temp. | 199 | °C | |
| Adapter Temperature | 199 | °C | |
| Melt Temperature | 196 | °C | |
| Die Temperature | 199 | °C |
| Extrusion instructions |
|---|
| Dew Point: -40°CScreen Pack Recommendation: 20/40/80/20 |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3892 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| SARANEX™ 450 | The Dow Chemical Company | PVDC | SARANEX™ |
| TAROLON 3020 | Taro Plast S.p.A. | PC | TAROLON |
| ANYBES Nylon 12 Fine Powder | SH Energy & Chemical | Nylon 12 | ANYBES |
| HIDEN® B500 | YUHWA Korea Petrochemical Ind. Co., Ltd. | HDPE | HIDEN® |
