Order Products : sales@su-jiao.com

Arak HDPE I3

Category:	HDPE , High Density Polyethylene
Manufacturer:	Shazand (Arak) Petrochemical Corporation
Trademark:	Arak HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	cACb73_Arak-HDPE-I3.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
I3 is a high density polyethylene grade, suitable for mass production injection moulding of articles in rapid shot sequence applications. Characteristics: Low distortion tendency. High hardness and rigidity. Good toughness. Good ESCR. Typical applications are: Transport and stacking crates particularly bottle crates. * I3 is suitable for food contact.

Message

I3 is a high density polyethylene grade, suitable for mass production injection moulding of articles in rapid shot sequence applications.
Characteristics:

Low distortion tendency.

High hardness and rigidity.

Good toughness.

Good ESCR.

Typical applications are:

Transport and stacking crates particularly bottle crates.

* I3 is suitable for food contact.

General Information
Features	Food Contact Acceptable Good Dimensional Stability Good Toughness High ESCR (Stress Crack Resist.) High Hardness High Rigidity
Uses	Crates
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.957	g/cm³	DIN 53479
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)	23	g/10 min	DIN 53735

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength	> 2.7	kJ/m²	DIN 53453

Optical	Nominal Value	Unit	Test Method
Yellowness Index	< 4.0	YI	DIN 6167

Resin Grade	Manufacturer	Category	Trademark
VITAMIDE® AR34BK9008	Jackdaw Polymers	Nylon 66	VITAMIDE®
TRIEL® 5750	Samyang Corporation	TPEE	TRIEL®
Cevian®-N GRSJ	Daicel Polymer Ltd.	SAN	Cevian®-N
Formolene® 2706N	Formosa Plastics Corporation, U.S.A.	PP Copolymer	Formolene®
IDI STC 4450B	IDI Composites International	TS, Unspecified	IDI STC