Order Products : sales@su-jiao.com

NuSil CV10-2568

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	c9SGrX_NuSil-CV10-2568.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Fast Cure, Low Density, Primed Lap Shear 175 psi (1.2 MPa)

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: Fast Cure, Low Density, Primed Lap Shear 175 psi (1.2 MPa)

General Information
Features	Fast Cure Low Density Low to No Outgassing
Uses	Adhesives Aerospace Applications Electrical/Electronic Applications Sealants
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermal	Nominal Value	Unit
CLTE - Flow	2.5E-4	cm/cm/°C

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Color	Red
Density	0.758	g/cm³
Viscosity
-- ¹	80	Pa·s
-- ²	130	Pa·s
Curing Time (150°C)	0.050	hr
Pot Life	180	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	40
Lap Shear Strength ³	1.21	MPa
Tensile Strength	1.62	MPa
Tensile Elongation at Break	170	%
Electric Strength	34	kV/mm

Note Message
1 .	Part B
2 .	Part A
3 .	Primed with CF1-135

Resin Grade	Manufacturer	Category	Trademark
PPR ABS01	Premier Plastic Resins, Inc.	ABS	PPR
Trademark PE LDVA2925.3F	Trademark Plastics Corporation	LDPE+EVA	Trademark PE
Xuchuan XWB-335	Xuchuan Chemical (Suzhou) Co., Ltd	PUR, Unspecified	Xuchuan
BCC Resins BC 8002	BCC Products Inc.	PUR, Unspecified	BCC Resins
LNP™ STAT-LOY™ NX03583 compound	SABIC Innovative Plastics	PC+ABS	LNP™ STAT-LOY™