Order Products : sales@su-jiao.com
Monprene® OM-12252
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Monprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | c82XGf_Monprene-OM-12252.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Monprene® OM-12252 is a Thermoplastic Elastomer (TPE) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Typical applications include:
|
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 45 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 3.45 | MPa | ASTM D412 |
| Tensile Strength (Break) | 3.79 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 400 | % | ASTM D412 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Adhesion to ABS | |||
| Adhesion to PC | |||
| Adhesion to PC/ABS |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 204 to 232 | °C | |
| Middle Temperature | 210 to 232 | °C | |
| Front Temperature | 216 to 238 | °C | |
| Nozzle Temperature | 221 to 243 | °C | |
| Processing (Melt) Temp | 221 to 243 | °C | |
| Mold Temperature | 23.9 to 60.0 | °C | |
| Injection Pressure | 1.38 to 6.89 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.172 to 0.862 | MPa | |
| Screw Speed | 50 to 120 | rpm | |
| Cushion | 3.81 to 25.4 | mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® C 216 V15 BLACK 61 | Solvay Engineering Plastics | Nylon 6 | TECHNYL® C |
| SLOVALEN® PH 56 FRD 1 | Plastcom | PP, Unspecified | SLOVALEN® |
| ADDINYL C2 M20 V10 | ADDIPLAST | Nylon 66/6 | ADDINYL |
| ENFLEX VU-120-55A | ENPLAST, a Ravago Group Company | TPV | ENFLEX |
| Epoxies, Ect. 50-1220 | Epoxies, Etc. | Silicone | Epoxies, Ect. |
