Order Products : sales@su-jiao.com
EVALENE® HDPE HM10561
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | JG Summit Petrochemical Corporation |
| Trademark: | EVALENE® HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | c3gUHg_EVALENE-HDPE-HM10561.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HDPE is used to make large drums, bleach bottles, shopping bags, crates nets and pails. Tough. Rigid. Heavy Duty. With High Chemical Resistance. These qualities make Evalene® HDPE suitable for a diverse line of industrial products. Blown Film: Shopping and grocery bags Pipes: Pressure and non-pressure pipes Blow Molding: Bottles for household and industrial chemicals, large drums Injection Molding: Pallets, crates, cases, trays, toys, houseware, caps |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.956 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(Injection Molded) | 800 | MPa | ASTM D638 |
| Tensile Strength 2(Yield, Injection Molded) | 24.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Injection Molded) | > 500 | % | ASTM D638 |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8240-95 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Ultraform® N 2320 U03 UNC Q600 | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| UNITIKA Nylon 6 A1022GFL60 (A) | UNITIKA Plastics Division | Nylon 6 | UNITIKA Nylon 6 |
| MAGNUM™ 3904 Smooth LP | Trinseo | ABS | MAGNUM™ |
| Vyncolit® X684 | SBHPP | Phenolic | Vyncolit® |
