Order Products : sales@su-jiao.com

MFE® -11

Category:	Vinyl Ester , Vinyl Ester
Manufacturer:	Huachang Polymer Co., Ltd.
Trademark:	MFE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	c3c1tn_MFE--11.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

MFE-11 is a bisphenol-A epoxy vinyl ester resin with high performance and excellent corrosion resistance.

PROPERTIES

Moderate viscosity, effectively wet out with glass fiber

Good air drying, surface drying in 45 min

Excellent corrosion resistance, especially to alkali.

Low peak exotherm, low shrinkage, superior toughness. Do not crack when making thick parts.

Lloyd's Registered.

Complies with FDA regulation 21 CFR 177.2420, when properly formulated and cured, for repeated use in food contact materials.

APPLICATION

Chemical storage tank, pipeline, cabin and the jointing material of integral anti-corrosive resin-mortar flooring, granite and anti-proof brick, etc.

Liner and flake of FRP protective surface of metal or concrete structure.

Can be used in hand lay-up, pultrusion, spray up and filament winding process.

General Information
Features	Alkali Resistant Food Contact Acceptable Good Corrosion Resistance Good Crack Resistance Good Toughness Low Exotherm Low Shrinkage Medium Viscosity
Uses	Industrial Tanks Liners Piping
Agency Ratings	FDA 21 CFR 177.2420
Appearance	Transparent - Slight Yellow
Processing Method	Filament Winding Hand Lay-up Pultrusion Spraying

Physical	Nominal Value	Unit	Test Method
Acid Value	6.00 to 12.00	mg KOH/g
Solids Content	59 to 65	%
Viscosity (25°C)	300 to 500	mPa·s

Thermal	Nominal Value	Unit	Test Method
Thermal Stability (80°C)	> 2	day

Thermoset	Nominal Value	Unit
Gel Time (25°C)	8.0 to 16.0	min

Additional Information	Nominal Value	Unit
Gel to Peak	6.0 to 14.0	min
Peak Exotherm	130 to 140	°C

Hardness	Nominal Value	Unit	Test Method
Barcol Hardness	45		ASTM D2583

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus ¹	4200	MPa	ASTM D638
Tensile Strength ²	85.0	MPa	ASTM D638
Tensile Elongation ³(Break)	5.0	%	ASTM D638
Flexural Modulus			ASTM D790
-- ⁴	> 12000	MPa
-- ⁵	4000	MPa
Flexural Strength			ASTM D790
-- ⁶	> 320	MPa
-- ⁷	150	MPa

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load ⁸(1.8 MPa, Unannealed)	105	°C	ASTM D648

Note Message
1 .	Casting
2 .	Casting
3 .	Casting
4 .	FRP
5 .	Casting
6 .	FRP
7 .	Casting
8 .	Casting

Resin Grade	Manufacturer	Category	Trademark
MAXAMID™ PA666G60 BK	Pier One Polymers, Inc.	Nylon 66/6	MAXAMID™
Verolloy A1700	PlastxWorld Inc.	ABS+Nylon	Verolloy
ZEONOR® 1020R	Zeon Corporation	COP	ZEONOR®
Elastollan® 1195A10 Film	BASF Corp. Thermoplastic Polyurethanes	TPU-Polyether	Elastollan®
INEOS Wire & Cable BPD8167	INEOS Olefins & Polymers Europe	PE, Unspecified	INEOS Wire & Cable