Order Products : sales@su-jiao.com
KMI PE LDPE REPRO
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | KMI Group, Inc. |
| Trademark: | KMI PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | c3DW1M_KMIPELDPEREPRO.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This material displayed very elastic properties. Tensile testing showed full extension to 900mm at 5mm per minute without breaking. Material also registered a No-Break on all five IZOD specimens. Shrink values showed very high as well. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | < 1.00 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 19 | % | ASTM D955 |
| Ash Content | 2.4 | % | ASTM D5630 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 94 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 8.63 | MPa | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C) | 680 | J/m | ASTM D256 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TITANLENE® LDF 260DF | Lotte Chemical Titan (M) Sdn. Bhd. | LDPE | TITANLENE® |
| Pibiflex® E6060 NATURALE | SO.F.TER. SPA | TPC-ET | Pibiflex® |
| PERLER® N09V3000B10 | A.D. Compound S.p.A. | PP Copolymer | PERLER® |
| Sylvin 9067-95 LMW Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| LEXAN™ LS2 resin | SABIC Innovative Plastics | PC | LEXAN™ |
