Order Products : sales@su-jiao.com

Ebalta Silicone Thin Liquid

Category:	Silicone , Silicone
Manufacturer:	Ebalta Kunststoff GmbH
Trademark:	Ebalta
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	c0GZbr_Ebalta-Silicone-Thin-Liquid.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ebalta silicone casting compounds are self dissociating, condensation-interlacing two-component silicone rubber suitable for production of elastic castings with good mechanical properties. There are two different silicone rubber products available. The silicone compound "thin" consists of a low viscous, pearl-white silicone rubber and has very good flow properties. The self-dissociating casting compounds can be cast in any requested thickness. They are used where mechanically stressed parts and moulds with dimensionally stability are required or where high heat resistance is wanted. Applications Flexible parts Casting mould for gypsum Casting mould for wax Casting mould for plastic Casting mould for ceramic materials Casting of flexible gaskets Cast-in of electric parts Art casting Properties condensation curing well castable low viscosity in-mould releasing

Message

ebalta silicone casting compounds are self dissociating, condensation-interlacing two-component silicone rubber suitable for production of elastic castings with good mechanical properties. There are two different silicone rubber products available.

The silicone compound "thin" consists of a low viscous, pearl-white silicone rubber and has very good flow properties. The self-dissociating casting compounds can be cast in any requested thickness. They are used where mechanically stressed parts and moulds with dimensionally stability are required or where high heat resistance is wanted.

Applications

Flexible parts

Casting mould for gypsum

Casting mould for wax

Casting mould for plastic

Casting mould for ceramic materials

Casting of flexible gaskets

Cast-in of electric parts

Art casting

Properties

condensation curing

well castable

low viscosity

in-mould releasing

General Information
Features	Good Dimensional Stability Good Flexibility Good Flow High Heat Resistance Low Viscosity
Uses	Electrical Parts Gaskets Molds/Dies/Tools
Appearance	Light Grey
Forms	Liquid
Processing Method	Casting

Physical	Nominal Value	Unit	Test Method
Molding Shrinkage	0.50	%	Internal Method

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	19 to 23		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Yield)	2.20 to 3.20	MPa	ISO 37

Thermoset	Nominal Value	Unit
Thermoset Components
Hardener	Mix Ratio by Weight: 2.0
Resin	Mix Ratio by Weight: 100

Uncured Properties	Nominal Value	Unit
Density (20°C)	1.09 to 1.15	g/cm³
Viscosity (25°C)	5.0 to 7.0	Pa·s
Curing Time (20°C)	20 to 24	hr
Pot Life ²(20°C)	80 to 90	min

Note Message
1 .	Type 2
2 .	200 g

Resin Grade	Manufacturer	Category	Trademark
Ultron® 150	Asia International Enterprise (Hong Kong) Limited	PEI	Ultron®
VAMPAMID HT 0024 V0	Vamp Tech	PPA	VAMPAMID
AIE LCP L9010F-GF30	Asia International Enterprise (Hong Kong) Limited	LCP	AIE LCP
BULKSAM® TML-19F	UMG ABS, Ltd.	ABS	BULKSAM®
Plaslube® PA6/6 GF10 TL5	Techmer Engineered Solutions	Nylon 66	Plaslube®