Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
Manufacturer: | Great Eastern Resins Industrial Co Ltd (GRECO) |
Trademark: | ISOTHANE® |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | bzhG92_ISOTHANE-1080A.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
ISOTHANE 1080A products is poly(adipate)ester based thermoplastic polyurethanes with good balanced qualities. It exhibits good toughness, abrasive resistance, solvent resistance, and transparency. The product can be injection molded, blow molded, and extruded. |
General Information | |
---|---|
Features |
|
Appearance |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
Hardness | Nominal Value | Unit | Test Method |
---|---|---|---|
Durometer Hardness (Shore A) | 82 | ASTM D2240 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Taber Abrasion Resistance (H-22 Wheel) | 10.0 | mg | ASTM D1044 |
Elastomers | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Stress | ASTM D412 | ||
50% Strain | 3.70 | MPa | |
100% Strain | 5.20 | MPa | |
300% Strain | 11.0 | MPa | |
Tensile Strength (Yield) | 34.0 | MPa | ASTM D412 |
Tensile Elongation (Break) | 580 | % | ASTM D412 |
Tear Strength 1 | 80.0 | kN/m | ASTM D624 |
Compression Set | ASTM D395B | ||
23°C, 22 hr | 25 | % | |
70°C, 22 hr | 75 | % |
Note Message | |
---|---|
1 . | Die C |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
ALCOM® PBT 700/1 GF30 TF15 SI2 | ALBIS PLASTIC GmbH | PBT | ALCOM® PBT |
DAI-EL™ G-702 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
EMPILON® 730 | EMPILON | SEBS | EMPILON® |
Plaslube® PA6 GF15 TL15 | Techmer Engineered Solutions | Nylon 6 | Plaslube® |
POTICON VCF442 | Otsuka Chemical Co., Ltd. | LCP | POTICON |