Order Products : sales@su-jiao.com

Trivin™ 1015

Category:	PVC, Rigid , Rigid Polyvinyl Chloride
Manufacturer:	Vi-Chem Corporation
Trademark:	Trivin™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	bxy0co_Trivin-1015.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Trivin™ 1015 is a Rigid Polyvinyl Chloride material filled with 7.5% filler. It is available in North America for injection molding.

Important attributes of Trivin™ 1015 are:

Good Weather Resistance

Heat Resistant

Low Shrinkage

Typical applications include:

Construction Applications

Engineering/Industrial Parts

General Information
Filler / Reinforcement	Filler, 7.5% Filler by Weight
Features	Good Weather Resistance High Heat Resistance Low Shrinkage
Uses	Construction Applications Thin-walled Parts
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.35	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, 15 sec)	75 to 85		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	30.0	MPa	ASTM D638
Flexural Modulus	2000	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Gardner Impact ¹(2.10 mm)	9.00	J	ASTM D5420

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, Unannealed	60.0	°C
1.8 MPa, Unannealed	55.0	°C
Vicat Softening Temperature	60.0	°C	ASTM D1525

Flammability	Nominal Value	Unit
Fogging
16 hrs : 38°C	95	%
6 hrs : 38°C	95	%

Note Message
1 .	0.08 to 0.085 in, ductile failure

Resin Grade	Manufacturer	Category	Trademark
SWANCOR Epoxy 901-2T	SWANCOR IND. CO., LTD.	Epoxy	SWANCOR Epoxy
Toyolac® TP70	Toray Resin Company	ABS	Toyolac®
TROGAMID® CX CX9710	Evonik Industries AG	Nylon, Unspecified	TROGAMID® CX
Cheng Yu T888G1	Cheng Yu Plastic Company Limited	PBT	Cheng Yu
ELITE™ AT 6101	The Dow Chemical Company	EPE	ELITE™