Order Products : sales@su-jiao.com
Tecolen® HP10 GR30 NL HS
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Eurotec Engineering Plastics |
| Trademark: | Tecolen® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bxg2mL_Tecolen-HP10-GR30-NL-HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PPHP, 30% glass fiber reinforced, heat stabilized, natural |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.11 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 6250 | MPa | ISO 527-2 |
| Tensile Stress (Break, 23°C) | 90.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 3.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (23°C) | 14 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 155 | °C | ISO 75-2/A |
| Melting Temperature 1 | 165 to 170 | °C | ISO 11357-3 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+15 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.750 mm | HB | ||
| 1.60 mm | HB |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | < 60.0 | °C | |
| Processing (Melt) Temp | 200 to 240 | °C | |
| Mold Temperature | 20.0 to 50.0 | °C | |
| Injection Rate | Slow-Moderate | ||
| Holding Pressure | 40.0 to 80.0 | MPa | |
| Back Pressure | Low |
| Note Message | |
|---|---|
| 1 . | 10 K/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxguard™ CG-CM Series | Ashland Performance Materials | TS, Unspecified | Maxguard™ |
| Ravago Compounds HM-306 (Comp) | Ravago Manufacturing Americas, LLC | MDPE | Ravago Compounds |
| Akulon® S223-DK | DSM Engineering Plastics | Nylon 66 | Akulon® |
| ASTALOY™ PC/ABS M150-28328 | Marplex Australia Pty. Ltd. | PC+ABS | ASTALOY™ |
| LNP™ STAT-KON™ RE0029 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ STAT-KON™ |
