Order Products : sales@su-jiao.com
Hylex® P1307L3 HB
| Category: | PC , Polycarbonate |
| Manufacturer: | Entec Polymers |
| Trademark: | Hylex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bqdiHr_HylexP1307L3HB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCARBONATE, UV STABILIZED, LOW MELT FLOW, MOLD RELEASE |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 7.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 - 0.70 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.15 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, 23°C) | 65.5 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 110 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2340 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 93.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 910 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 124 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® A RV300FC 100 NAT 4792 | Radici Plastics | Nylon 66 | Radilon® |
| REVOLVE® M-681 | Matrix Polymers | PE, Unspecified | REVOLVE® |
| Sumitomo Phenolic FM 3000 | Sumitomo Bakelite North America, Inc. | Phenolic | Sumitomo Phenolic |
| Terralene® WF 5525 | FKuR Kunststoff GmbH | HDPE | Terralene® |
| DAI-EL™ G-702 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
