Order Products : sales@su-jiao.com

Hypel® PELD50/.924

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Entec Polymers
Trademark:	Hypel®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	bq33gG_Hypel-PELD50-924.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Hypel® PELD50/.924 is a Low Density Polyethylene material. It is available in North America.

Important attributes of Hypel® PELD50/.924 are:

RoHS Compliant

Food Contact Acceptable

Typical application of Hypel® PELD50/.924: Food Contact Applications

General Information
Features	Food Contact Acceptable Low Density
Agency Ratings	FDA 21 CFR 176.170, Table 2, Cond. B FDA 21 CFR 176.170, Table 2, Cond. C FDA 21 CFR 176.170, Table 2, Cond. D FDA 21 CFR 176.170, Table 2, Cond. E FDA 21 CFR 176.170, Table 2, Cond. F FDA 21 CFR 176.170, Table 2, Cond. G FDA 21 CFR 176.170, Table 2, Cond. H FDA 21 CFR 177.1520
RoHS Compliance	RoHS Compliant
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.922	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	50	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield, 23°C	11.7	MPa
Break, 23°C	8.96	MPa
Tensile Elongation (Break, 23°C)	100	%	ASTM D638
Flexural Modulus - 2% Secant (23°C)	345	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	97.8	°C	ASTM D1525 ¹

Note Message
1 .	Rate A (50°C/h), Loading 1 (10 N)

Resin Grade	Manufacturer	Category	Trademark
PrimoTuff 118E	KMI Group Inc.	TPO (POE)	PrimoTuff
Radilon® A USZ200 100 NAT	Radici Plastics	Nylon 66	Radilon®
Synres-Almoco AMC 2568	Synres-Almoco BV	Polyester, TS	Synres-Almoco
Europrene Latice® 8435	Versalis S.p.A.	SBR, Emulsion	Europrene Latice®
LUVOCOM® 50-8376	Lehmann & Voss & Co.	PC	LUVOCOM®