REBOUND® 25

Category:	Silicone , Silicone
Manufacturer:	Smooth-On, Inc
Trademark:	REBOUND®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	bpS4M2_REBOUND-25.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Rebound® 25 and Rebound® 40 are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound® rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber. Rebound® 25 is soft, flexible and is good for making molds of models with deep undercuts. Depending on model configuration, Rebound® 25 can be inverted as a glove molds. Rebound® 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound® 25 and back it up with two coats of Rebound® 40. Advantages Over Urethane Brush-On® Rubber: (a) Rebound® will not stick to most surfaces, so surface preparation is minimal, (b) Two liquids that mix easily together, (c) stands up better to production casting of resins and low temperature melt metal alloys and (d) has a long library life. 4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound® is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.

Message

Rebound® 25 and Rebound® 40 are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound® rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.

Rebound® 25 is soft, flexible and is good for making molds of models with deep undercuts. Depending on model configuration, Rebound® 25 can be inverted as a glove molds. Rebound® 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound® 25 and back it up with two coats of Rebound® 40.

Advantages Over Urethane Brush-On® Rubber: (a) Rebound® will not stick to most surfaces, so surface preparation is minimal, (b) Two liquids that mix easily together, (c) stands up better to production casting of resins and low temperature melt metal alloys and (d) has a long library life.

4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound® is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.

General Information
Features	Good Flexibility Good Strength Good Stretchability Low Shrinkage Soft
Uses	Modeling Material
Appearance	Orange
Processing Method	Casting

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.14	g/cm³	ASTM D1475
Specific Volume	0.849	cm³/g	ASTM D1475

Additional Information	Nominal Value	Unit	Test Method
Cure Time	6.0	hr

Physical	Nominal Value	Unit	Test Method
Molding Shrinkage - Flow	< 0.10	%	ASTM D2566

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	25		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Break)	3.55	MPa	ASTM D412
Tensile Elongation (Break)	690	%	ASTM D412
Tear Strength ¹	17.9	kN/m	ASTM D624

Thermoset	Nominal Value	Unit	Test Method
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0
Pot Life	20	min	ASTM D2471

Note Message
1 .	Die B

Resin Grade	Manufacturer	Category	Trademark
RAMOFIN PPH501G4	Polyram Ram-On Industries	PP Homopolymer	RAMOFIN
VESTAMID® Terra DS16 natural color	Evonik Industries AG	Nylon 1010	VESTAMID® Terra
Vi-Chem PVC V143-90E-8798	Vi-Chem Corporation	PVC, Flexible	Vi-Chem PVC
HiFill® POM HO UV	Techmer Engineered Solutions	Acetal (POM) Homopolymer	HiFill®
Pier One PC PC1418-CLEAR	Pier One Polymers, Inc.	PC	Pier One PC