Order Products : sales@su-jiao.com

KMI PP KM-058IB

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	KMI Group, Inc.
Trademark:	KMI PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	boc8Xi_KMIPPKM058IB.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
KM-058IB is a high flow impact copolymer for injection molding applications. It exhibits a high rigidity as well as excellent impact strength due to the ideal combination of highly crystalline homo matrix and the well-designed rubber morphology. This is suitable for the injection molding of large articles which require high melt flowability. Food Contact Application: KM-058IB meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. Characteristics: High stiffness and flowability Excellent balance between stiffness and impact strength

Message

KM-058IB is a high flow impact copolymer for injection molding applications. It exhibits a high rigidity as well as excellent impact strength due to the ideal combination of highly crystalline homo matrix and the well-designed rubber morphology. This is suitable for the injection molding of large articles which require high melt flowability.

Food Contact Application:
KM-058IB meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.

Characteristics:

High stiffness and flowability

Excellent balance between stiffness and impact strength

General Information
Features	Rigidity, high Rigidity, high High crystallization Impact copolymer Impact resistance, high High liquidity Compliance of Food Exposure
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.910	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	43	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	85		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	28.4	MPa	ASTM D638
Tensile Elongation (Break)	50	%	ASTM D638
Flexural Modulus	1570	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact (23°C)	69	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Heat Distortion	120	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
RTP 800 GB 30 TFE 10	RTP Company	Acetal (POM) Copolymer	RTP
VYTEEN ABS 2904 DX9	Lavergne Group	ABS	VYTEEN
Chemical Resources LD2918	Chemical Resources, Inc.	LDPE	Chemical Resources
LNP™ THERMOCOMP™ ZX08309 compound	SABIC Innovative Plastics Asia Pacific	PPE+PS	LNP™ THERMOCOMP™
LNP™ THERMOCOMP™ ECF62 compound	SABIC Innovative Plastics	PEI	LNP™ THERMOCOMP™